Iron/Nickel Alloy Spooled Wire (Fe50/Ni50)

Formula: Fe 50/Ni 50

Form: Wire

Material: Iron/Nickel Alloy

Commodity: Alloys

Diameter: 1mm

Temper: Annealed

Hazard Pictogram: GHS07,GHS08

Iron/nickel alloy spooled wire (Fe50/Ni50) is an alloy wire produced by Goodfellow within their range of specialty wires. With a composition of 50% iron and 50% nickel, this wire combines the strength of iron with the corrosion resistance of nickel. The wire has high tensile strength and good ductility. Applications of Fe50/Ni50 wire include use in electrical components like resistors due to its relatively high resistivity and low temperature coefficient of resistance. The alloy wire is also used for springs and other parts that require elastic properties.

Wishlist

Technical Data Sheet Safety Data Sheet Tolerance Properties

Health hazard/Hazardous to the ozone layer

Serious health hazard

each

Tolerances

Wire

Diameter		±10%
Length		+5% / -1%

Material Properties for Alloys

Mechanical Properties

Element	Value
Elongation at break( % )	35
Modulus of elasticity( GPa )	159
Tensile strength( MPa )	552

Electrical Properties

Element	Value
Electrical resistivity( µOhmcm )	44
Temperature coefficient( K⁻¹ )	-

Magnetic Properties

Element	Value
Curie temperature( C )	530

Thermal Properties

Element	Value
Melting point( C )	1400-1450
Specific heat( J K⁻¹ kg⁻¹ )	502@23°C
Thermal conductivity( W m⁻¹ K⁻¹ )	14@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	9.9@25-450°C