Entregar aReino Unido de Gran Bretaña e Irlanda del Norte


     Productos  Elementos
    Transporte LIBRE *

    *Pueden aplicarse cargos de entrega restringidos

    Inicio de sesión/Registro

    Resumen del producto Aleación con memoria de forma magnética

    Goodfellow is delighted to announce the addition of an exciting new product to our range - Magnetic Shape Memory Material.

    What is magnetic shape memory (MSM) effect or magnetic-field-induced reorientation (MIR)?

    "Magnetic-field-induced rearrangement of (ferromagnetic) twinned martensite microstructure accompanied by a large macroscopic deformation."

    This patented NiMnGa single crystal material has some extremely innovative properties:


    Magnetic Shape Memory Effect - up to 6% elongation in a magnetic field.

    Exhibits Villari (inverse magnetostrictive) effect.

    Shape Memory Alloy effect - in addition to a shape change caused by the application of a magnetic field, an additional shape change is caused by temperature.

    Change in resistance if the element is fully elongated or compressed.

    Controlled spring properties.



    The magnetic shape memory effect can be used to design actuators, where the element elongates based on the presence of a magnetic field.  The elongation is fully reversible, either by applying a magnetic field at 90° to the original field, or more effectively by use of a spring.  The shape change is very rapid, and cycle times of 1 to 2 kHz have been shown.  Several hundred million cycles have been achieved while testing fatigue life.

    Whilst not achieving the frequency of piezo-based materials or magnetostrictive materials, magnetic shape memory materials give much higher strain outputs (typically 10 to 100 times more).  They also provide higher energy density, typically up to 100kJm-3 compared to 14 to 30kJm-3 for magnetostrictive materials and 0.8 to 2kJm-3 for piezo-based materials.


    A laboratory-based actuator with return spring

    Breaker switch/fuse

    The additional thermal shape memory property, whereby the material elongates even further above 70°C can be used as a safety cut-out. The actuator runs until the safe working temperature is reached whereupon it extends further, cutting the magnetic field generation. This additional elongation is fully reversible, and below 70°C the actuator functions normally again.

    Energy harvesters

    Compressing or elongating this material causes it to alter any magnetic field in which it is placed (variable magnetic permeability under varying stress), which can be used to “harvest” vibration energy. Possible uses include battery charging in environments where it is difficult to gain access to the batteries for replacement.

    Vibration dampers

    The same properties used to create energy harvesters can be used to damp mechanical vibration.


    Using the material’s properties, it is possible to construct speed sensors as well as distance, strain and magnetic field detectors.


    In order to minimise the magnetic energy required to elongate the material, a thin, wide cross-section is preferred, and as the elongation is a multiple of the length, a comparatively long strip is also preferred. Therefore Goodfellow is offering this material in the following dimensions:

    1 mm thickness x 2.5 mm width x 20mm length
    1 mm thickness x 5 mm width x 20mm length
    2 mm thickness x 5 mm width x 20mm length

    These are our standard dimensions, but other dimensions are of course available on request. Currently the maximum single crystal size is 18mm diameter x 30mm length. Smaller pieces are cut from within the above dimensions using special techniques to preserve the performance of the material. Development work is underway to produce larger crystals, and as these become available we will keep you informed via our website.

    If you would like to know more about this material, please send us an e-mail or telephone us using the numbers on our contact page.

    A technical datasheet is available here.

    Sorry, but you need to update your browser to use our website.

    We apologise for any inconvenience this may cause and thanks for your patience.

    To place a phone order:
    US:1 800 821 2870
    UK: 0800 731 4653

    Customer Support:

    Thank you
    The Goodfellow Team

    Hable con nuestro equipo de expertos llamando 0800 731 4653 (UK), o complete el siguiente formulario.