VICTREX® APTIV® 1102 20% mineral filled PEEK Coil

VICTREX® APTIV® 1102 20% mineral filled PEEK Coil provides a roll of film with added mineral for extra stiffness and dimensional control in continuous processes. Converters appreciate the way it tracks through laminating and tape lines, maintaining registration in multilayer builds and resisting creep in clamped assemblies near heat‑generating components. Motor, drive, and battery systems use it for slot liners, phase insulation, and carrier layers that must stay flat and stable over long service intervals. The coil format supports efficient yield, long runs, and clean slitting, while the reinforcement improves handling and die‑cut quality. In applications where thin films need better stability than unfilled PEEK, APTIV 1102 offers a halogen‑free solution that integrates smoothly with adhesives, foils, and fabrics in production environments.

Quick Links:

Tolerance

Properties

Reference & Citations

each

Tolerances

Coil

Thickness		±20%

Material Properties for Polymers

Chemical Resistance

Element	Value
Acids - concentrated	Good-Poor
Acids - dilute	Good
Alcohols	Good
Alkalis	Good
Aromatic hydrocarbons	Good
Greases and Oils	Good
Halogenated Hydrocarbons	Good
Halogens	Good-Poor
Ketones	Good-Poor

Physical Properties

Element	Value
Radiation resistance	Good
Density( gcm⁻³ )	1.45

Mechanical Properties

Element	Value
Elongation at break( % )	>10 (TD) - 7 (TD)
Elongation at break( % )	>100 (MD) - 6 (MD)
Elongation at break( % )	10(TD)
Elongation at break( % )	100(MD)
Tensile modulus( GPa )	4.5-5(MD)
Tensile modulus( GPa )	4.2-4.5 (TD) -
Tensile modulus( GPa )	4.2-4.5(TD)
Tensile modulus( GPa )	4.5-5.0 (MD) - Good
Tensile strength( MPa )	80 (TD) - 4.2-4.5 (TD)
Tensile strength( MPa )	100(MD)
Tensile strength( MPa )	100 (MD) - 4.5-5.0 (MD)
Tensile strength( MPa )	80(TD)
Tear strength( N mm⁻¹ )	6(MD)
Tear strength( N mm⁻¹ )	7(TD)
Tear strength( N mm⁻¹ )	7 (TD) -
Tear strength( N mm⁻¹ )	6 (MD) - 200