Vectra® A 15% Reinforced Glass Fiber Rod

Formula: Liquid Crystal Polyester - 15% GFR

Form: Rod

Material: Vectra® A 15% Reinforced Glass Fiber

Commodity: Polymers

Diameter: 10mm

Vectra® A 15% Reinforced Glass Fiber Rods are part of our range of rods made from high performance engineering thermoplastics. They contain 15% glass fiber reinforcement for added strength and rigidity. Vectra® A 15% Reinforced Glass Fiber Rods are commonly used in applications requiring good dimensional stability like precision components, bushings, bearings and wear strips. Their combination of high stiffness, low friction and dimensional stability also make theme an ideal choice for sliding contact applications.

Wishlist

Technical Data Sheet Safety Data Sheet Tolerance Properties

each

Tolerances

Rod

Diameter		+20% / -10%

Material Properties for Polymers

Chemical Resistance

Element	Value
Acids - concentrated	Fair
Acids - dilute	Good
Alcohols	Good
Alkalis	Fair
Aromatic hydrocarbons	Good
Greases and Oils	Good
Ketones	Good

Electrical Properties

Element	Value
Dielectric constant @1MHz	3
Dissipation factor @ 1MHz	0.018
Dielectric strength( kV mm⁻¹ )	34
Surface resistivity( Ohm/sq )	10¹³
Volume resistivity( Ohmcm )	>10¹⁵

Physical Properties

Element	Value
Flammability	V-0
Radiation resistance	Good
Resistance to Ultra-violet	Good
Density( gcm⁻³ )	1.5

Mechanical Properties

Element	Value
Hardness - Rockwell	M80
Elongation at break( % )	3.1
Compressive modulus( GPa )	10
Tensile modulus( GPa )	12
Tensile strength( MPa )	200

Thermal Properties

Element	Value
Heat-deflection temperature - 1.8MPa( C )	230
Upper working temperature( C )	200-220
Thermal conductivity( W m⁻¹ K⁻¹ )	3-3.3
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	May-18