Polypropylene Laminate

Polypropylene Laminate combines polypropylene’s chemical resistance and low density with layered reinforcement or barrier materials to enhance stiffness, mechanical strength, and environmental durability. Supplied in cut-to-size sheets, this format is suited for precision applications in chemical processing equipment linings, lightweight structural panels, and moisture-resistant barrier walls. The laminate construction allows tailoring of mechanical and thermal properties for specific performance needs. Industries such as aerospace, marine engineering, and cleanroom construction utilize these sheets for their balance of mechanical performance and resistance to environmental degradation. Research uses include evaluating multi-material adhesion, mechanical fatigue testing under cyclic loads, and optimization of lightweight composite systems. The ready-to-use size format streamlines fabrication while ensuring consistent quality across components.

Quick Links:

Tolerance

Properties

Reference & Citations

each

Tolerances

Laminate

Thickness		±10%

Sizes

Linear dimension	=<100mm	±1mm
Linear dimension	>100mm	+2% / -1%

Material Properties for Polymers

Chemical Resistance

Element	Value
Acids - concentrated	Good-Fair
Acids - dilute	Good-Fair
Alcohols	Good
Alkalis	Good
Aromatic hydrocarbons	Fair
Greases and Oils	Good-Fair
Halogenated Hydrocarbons	Good-Poor
Halogens	Poor
Ketones	Good

Mechanical Properties

Element	Value
Coefficient of friction	0.1-0.3
Hardness - Rockwell	R80-100
Elongation at break( % )	150-300, for biax film >50
Tensile modulus( GPa )	0.9-1.5, for biax film 2.2-4.2
Izod impact strength( J m⁻¹ )	20-100
Abrasive resistance - ASTM D1044( mg/1000 cycles )	13-16
Tensile strength( MPa )	25-40, for biax film 130-300,

Electrical Properties

Element	Value
Dielectric constant @1MHz	2.2-2.6
Dissipation factor @ 1MHz	0.0003-0.0005
Dielectric strength( kV mm⁻¹ )	30-40
Surface resistivity( Ohm/sq )	10¹³
Volume resistivity( Ohmcm )	10¹⁶-10¹⁸

Physical Properties

Element	Value
Flammability	HB
Radiation resistance	Fair
Refractive index	1.49
Resistance to Ultra-violet	Poor
Limiting oxygen index( % )	18
Water absorption - equilibrium( % )	0.03
Density( gcm⁻³ )	0.9

Thermal Properties

Element	Value
Heat-deflection temperature - 0.45MPa( C )	100-105
Heat-deflection temperature - 1.8MPa( C )	60-65
Lower working temperature( C )	50
Upper working temperature( C )	90-120
Specific heat( J K⁻¹ kg⁻¹ )	1700-1900
Thermal conductivity( W m⁻¹ K⁻¹ )	0.1-0.22@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	100-180