Images are for guidance only and might not represent the final product.

PMMA Spherical Powder

Available Configurations

Properties common to all products in this list

Composition: PMMA, Acrylic Form: Powder Material: Polymethyl methacrylate (PMMA) CAS Number: 9011-14-7 Commodity: Polymers
PMMA (poly(methyl methacrylate)) Spherical Powder offers controlled particles with uniform morphology, high optical transmittance (~92%), and chemical resistance to aqueous and organic solvent systems. Its performance in flow studies, rheological analysis, and filtration media development supports applications requiring reproducible material behavior. In laboratory and research settings, it is used as a calibration standard for laser diffraction instruments, a substrate for surface modification in biomedical studies, and a feedstock for selective laser sintering of microfluidic and optical components. Compatible with SEM imaging under low-voltage or conductive-coated conditions, this powder advances experimental precision in materials science and biomedical engineering.
Starting at $247.00 each
No Minimum order Free technical support *Free delivery worldwide

Material Properties

Physical Properties
Element Value
Abbe number 57.2
Flammability HB
Radiation resistance Fair
Refractive index 1.49
Resistance to Ultra-violet Good
Limiting oxygen index( % ) 17-20
Water absorption - over 24 hours( % ) 0.2
Density( gcm⁻³ ) 1.19
Chemical Resistance
Element Value
Acids - concentrated Good-Poor
Acids - dilute Good-Poor
Alcohols Good-Poor
Alkalis Good
Aromatic hydrocarbons Poor
Greases and Oils Good
Halogenated Hydrocarbons Poor
Halogens Poor
Ketones Poor
Electrical Properties
Element Value
Dielectric constant @1MHz 2.6
Dissipation factor @ 1MHz 0.014
Dielectric strength( kV mm⁻¹ ) 15
Surface resistivity( Ohm/sq ) 10¹⁴
Volume resistivity( Ohmcm ) 2-14 x 10¹⁵
Mechanical Properties
Element Value
Hardness - Rockwell M92-100
Poisson's ratio 0.35-0.4
Elongation at break( % ) 2.5-4
Tensile modulus( GPa ) 2.4-3.3
Izod impact strength( J m⁻¹ ) 16-32
Tensile strength( MPa ) 80
Thermal Properties
Element Value
Heat-deflection temperature - 0.45MPa( C ) 105
Heat-deflection temperature - 1.8MPa( C ) 95
Lower working temperature( C ) -40
Upper working temperature( C ) 50-90
Specific heat( J K⁻¹ kg⁻¹ ) 1400-1500
Thermal conductivity( W m⁻¹ K⁻¹ ) 0.17-0.19@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 70-77
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Composition: PMMA, Acrylic Form: Powder Material: Polymethyl methacrylate (PMMA) CAS Number: 9011-14-7 Commodity: Polymers

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Powder
Mean Particle Size Nominal
Minimum Particle Size Nominal
Maximum Particle Size Nominal
Maximum Particle Size Nominal
Particle Size D10 Nominal
Particle Size D50 Nominal
Particle Size D90 Nominal