Images are for guidance only and might not represent the final product.
Grade: Oil-filled
Formula: PA 6 - (C₆H₁₁N)ₙ
Form: Rod
Material: Polyamide 6 (PA)
CAS Number: 25038-54-4
Commodity: Polymers
Oil-filled Nylon 6 Rods are our range of hollow rods made from nylon 6 that contain oil in the hollow core. With 26 variations, these rods offer a lightweight yet robust solution for applications that require low friction and damping properties. The oil filling provides enhanced lubricity, making these rods ideal for use as plain bearings in rotating machinery. At the same time, their nylon composition provides high strength and stiffness, making them resistant to wear, abrasion, and harsh chemicals. Overall, our Oil-Filled Nylon 6 Rods represent an advanced bearing material suitable for demanding mechanical and chemical environments across industrial sectors.
Technical Data Sheet Safety Data Sheet Tolerance Properties
each

We are collecting your products, please wait!...

Shipping restrictions and charges
may apply for some hazardous materials.

Tolerances

Rod
Diameter +20% / -10%

Material Properties for Polymers

Chemical Resistance
Element Value
Acids - concentrated Poor
Acids - dilute Poor
Alcohols Good
Alkalis Good-Fair
Aromatic hydrocarbons Good
Greases and Oils Good
Halogenated Hydrocarbons Good-Poor
Halogens Poor
Ketones Good
Mechanical Properties
Element Value
Coefficient of friction 0.2-0.3
Hardness - Rockwell M82
Poisson's ratio 0.39
Tensile modulus( GPa ) 2.6-3
Izod impact strength( J m⁻¹ ) 30-250
Abrasive resistance - ASTM D1044( mg/1000 cycles ) 5
Tensile strength( MPa ) 78
Electrical Properties
Element Value
Dielectric constant @1MHz 3.6
Dissipation factor @ 1kHz 0.2
Dielectric strength( kV mm⁻¹ ) 25
Surface resistivity( Ohm/sq ) 5x10¹⁰
Volume resistivity( Ohmcm ) 5x10¹²
Physical Properties
Element Value
Flammability HB
Radiation resistance Fair
Refractive index 1.53
Resistance to Ultra-violet Poor
Limiting oxygen index( % ) 25
Water absorption - equilibrium( % ) 8
Water absorption - over 24 hours( % ) 2.7
Density( gcm⁻³ ) 1.13
Thermal Properties
Element Value
Heat-deflection temperature - 0.45MPa( C ) 200
Heat-deflection temperature - 1.8MPa( C ) 80
Lower working temperature( C ) -40
Upper working temperature( C ) 80-160
Specific heat( J K⁻¹ kg⁻¹ ) 1700
Thermal conductivity( W m⁻¹ K⁻¹ ) 0.24-0.28@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 95

Can't find what you're looking for? For customized options

Other Customers Purchased