Makrofol® KG Monoaxially Oriented and Crystallised Polycarbonate Film

Makrofol® KG Monoaxially Oriented and Crystallised Polycarbonate Film offers high tensile strength along the draw axis, low birefringence, and consistent thickness, making it suitable for ion track etching, nuclear particle detection, and dosimetry applications. Its dimensional stability under irradiation and thermal stress supports precision patterning and controlled pore formation in membrane research. The film performs reliably in microfluidic device prototyping, optical sensor development, and high-energy particle registration. Its uniform crystallinity and clean etching behavior enable reproducible results in radiation track analysis and advanced materials testing, supporting rigorous laboratory and R&D workflows across physics, materials science, and engineering domains.

Quick Links:

Tolerance

Properties

Reference & Citations

each

Tolerances

Foil

Thickness		±20%

Material Properties for Polymers

Physical Properties

Element	Value
Abbe number	34
Flammability	V0-V2
Radiation resistance	Fair
Refractive index	1.584-6
Resistance to Ultra-violet	Fair
Limiting oxygen index( % )	25-27
Water absorption - equilibrium( % )	0.35
Water absorption - over 24 hours( % )	0.1
Density( gcm⁻³ )	1.2

Chemical Resistance

Element	Value
Acids - concentrated	Good
Acids - dilute	Good
Alcohols	Good
Alkalis	Good-Poor
Aromatic hydrocarbons	Poor
Greases and Oils	Good-Fair
Halogenated Hydrocarbons	Good-Poor
Halogens	Poor
Ketones	Poor

Mechanical Properties

Element	Value
Coefficient of friction	0.31
Hardness - Rockwell	M70
Poisson's ratio	0.37
Elongation at break( % )	100-150
Tensile modulus( GPa )	2.3-2.4
Izod impact strength( J m⁻¹ )	600-850
Abrasive resistance - ASTM D1044( mg/1000 cycles )	Oct-15
Tensile strength( MPa )	55-75

Electrical Properties

Element	Value
Dielectric constant @1MHz	2.9
Dissipation factor @ 1MHz	0.01
Dielectric strength( kV mm⁻¹ )	15-67
Surface resistivity( Ohm/sq )	10¹⁵
Volume resistivity( Ohmcm )	10¹⁴-10¹⁶

Thermal Properties

Element	Value
Heat-deflection temperature - 0.45MPa( C )	140
Heat-deflection temperature - 1.8MPa( C )	128-138
Lower working temperature( C )	-135
Upper working temperature( C )	115-130
Specific heat( J K⁻¹ kg⁻¹ )	1200
Thermal conductivity( W m⁻¹ K⁻¹ )	0.19-0.22@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	66-70