Images are for guidance only and might not represent the final product.

VICTREX® PEEK 150UF10 PEEK Powder

Available Configurations

Properties common to all products in this list

Grade: VICTREX® PEEK 150UF10 Composition: PEEK Form: Powder Material: Polyetheretherketone (PEEK) CAS Number: 29658-26-2 Commodity: Polymers Mean Particle Size: 10µm Bulk Density: 0.3g/cm³
VICTREX® PEEK 150UF10 PEEK Powder features a fine particle size tailored for additive manufacturing techniques like laser sintering and electrophoretic deposition. Commonly used in research and laboratory development, it supports precise fabrication of components where dimensional accuracy, chemical stability, and thermal resistance are required. The powder’s uniform morphology and controlled flow properties improve dispersion in composite systems and coating processes. Its application spans biomedical device coatings, aerospace insulators, and high-frequency electronic components, where mechanical integrity and resistance to wear and solvents are necessary. This grade is particularly suited for detailed prototyping and functional part production in demanding R&D workflows.
Starting at $235.00 each
No Minimum order Free technical support *Free delivery worldwide

Material Properties

Chemical Resistance
Element Value
Acids - concentrated Good-Poor
Acids - dilute Good
Alcohols Good
Alkalis Good
Aromatic hydrocarbons Good
Greases and Oils Good
Halogenated Hydrocarbons Good
Halogens Good-Poor
Ketones Good-Poor
Mechanical Properties
Element Value
Coefficient of friction 0.18
Hardness - Rockwell M99
Poisson's ratio 0.4
Elongation at break( % ) 50
Tensile modulus( GPa ) 3.7-4
Izod impact strength( J m⁻¹ ) 85
Tensile strength( MPa ) 70-100
Electrical Properties
Element Value
Dielectric constant @1kHz 3.2-3.3@50Hz-10Khz
Dissipation factor @ 1MHz 0.003
Dielectric strength( kV mm⁻¹ ) 190@50µm
Volume resistivity( Ohmcm ) 10¹⁵-10¹⁶
Physical Properties
Element Value
Flammability V-0 @ 1.5mm
Radiation resistance Good
Resistance to Ultra-violet Fair
Limiting oxygen index( % ) 35
Water absorption - equilibrium( % ) 0.5
Water absorption - over 24 hours( % ) 0.1-0.3
Density( gcm⁻³ ) 1.26-1.32
Thermal Properties
Element Value
Heat-deflection temperature - 0.45MPa( C ) 260
Heat-deflection temperature - 1.8MPa( C ) 160
Upper working temperature( C ) 250
Specific heat( J K⁻¹ kg⁻¹ ) 1340
Thermal conductivity( W m⁻¹ K⁻¹ ) 0.25@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 47-108
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Grade: VICTREX® PEEK 150UF10 Composition: PEEK Form: Powder Material: Polyetheretherketone (PEEK) CAS Number: 29658-26-2 Commodity: Polymers Mean Particle Size: 10µm Bulk Density: 0.3g/cm³

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Powder
Mean Particle Size Nominal
Minimum Particle Size Nominal
Maximum Particle Size Nominal
Maximum Particle Size Nominal
Particle Size D10 Nominal
Particle Size D50 Nominal
Particle Size D90 Nominal