Images are for guidance only and might not represent the final product.

PET Powder

Available Configurations

Properties common to all products in this list

Composition: Polyester, PET, PETP Form: Powder Material: Polyethylene terephthalate (PET) CAS Number: 25038-59-9 Commodity: Polymers Max Particle Size: 300μm Structure: Semi Crystalline Crystallinity: >50% Additives: maximum 1ppm Acetaldehyde Inherent Viscosity: 0.80 dl/g Color: Natural
PET (polyethylene terephthalate) Powder is a high-purity thermoplastic polyester used in applications requiring controlled thermal behavior, chemical resistance, and consistent particle morphology. It supports research and laboratory activities focused on polymer processing, composite development, and additive manufacturing. The powder form allows precise blending in solvent casting, melt compounding, and powder-bed fusion techniques. Common end uses include barrier films, recyclable packaging, microfabricated structures, and bioresorbable devices. Its defined particle size distribution and predictable crystallinity enable reproducible results in formulation studies, surface functionalization, and performance optimization. PET Powder is suitable for projects requiring material uniformity, thermal stability, and repeatable processing.
Starting at $187.00 each
No Minimum order Free technical support *Free delivery worldwide

Material Properties

Chemical Resistance
Element Value
Acids - concentrated Good-Poor
Acids - dilute Good
Alcohols Good
Alkalis Poor
Aromatic hydrocarbons Good-Fair
Greases and Oils Good
Halogenated Hydrocarbons Good-Poor
Halogens Fair-Poor
Ketones Good-Fair
Mechanical Properties
Element Value
Coefficient of friction 0.2-0.4
Hardness - Rockwell M94-101
Poisson's ratio 0.37-0.44
Tensile modulus( GPa ) 02-Apr
Izod impact strength( J m⁻¹ ) 13-35
Tensile strength( MPa ) 80, for biax film 190-260
Electrical Properties
Element Value
Dielectric constant @1MHz 3
Dissipation factor @ 1kHz 0.002
Dielectric strength( kV mm⁻¹ ) 17
Surface resistivity( Ohm/sq ) 10¹³
Volume resistivity( Ohmcm ) >10¹⁴
Physical Properties
Element Value
Flammability HB
Radiation resistance Good
Refractive index 1.58-1.64
Resistance to Ultra-violet Fair?
Limiting oxygen index( % ) 21
Water absorption - equilibrium( % ) 0.7
Water absorption - over 24 hours( % ) 0.1
Density( gcm⁻³ ) 1.3-1.4
Thermal Properties
Element Value
Heat-deflection temperature - 0.45MPa( C ) 115
Heat-deflection temperature - 1.8MPa( C ) 80
Lower working temperature( C ) 20
Upper working temperature( C ) 115-170
Specific heat( J K⁻¹ kg⁻¹ ) 1200-1350
Thermal conductivity( W m⁻¹ K⁻¹ ) 0.15-0.4@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 20-80
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Composition: Polyester, PET, PETP Form: Powder Material: Polyethylene terephthalate (PET) CAS Number: 25038-59-9 Commodity: Polymers Max Particle Size: 300μm Structure: Semi Crystalline Crystallinity: >50% Additives: maximum 1ppm Acetaldehyde Inherent Viscosity: 0.80 dl/g Color: Natural

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Powder
Mean Particle Size Nominal
Minimum Particle Size Nominal
Maximum Particle Size Nominal
Maximum Particle Size Nominal
Particle Size D10 Nominal
Particle Size D50 Nominal
Particle Size D90 Nominal