Nylon 6 Film

Nylon 6 Film offers high tensile strength, flexibility, and chemical resistance, making it a versatile engineering polymer widely used in packaging, electronics, and mechanical engineering. Its excellent wear resistance and toughness allow it to function effectively as insulation films, protective coatings, and membranes in filtration systems. Industries such as automotive, aerospace, and electronics employ nylon 6 film for wire insulation, chemical-resistant packaging, and flexible mechanical barriers. Research applications focus on its moisture permeability, sorption characteristics, and modification for nanocomposites to enhance barrier properties. Its uniform geometry ensures consistent thickness and performance across devices, while its durability under solvents and mechanical stress makes it essential for advanced applications in insulation, protective films, and flexible engineering structures. This balance of mechanical strength and adaptability secures its position as a key polymer in both industrial processes and research innovation.

Quick Links:

Tolerance

Properties

Reference & Citations

each

Tolerances

Foil

Thickness		±20%

Material Properties for Polymers

Chemical Resistance

Element	Value
Acids - concentrated	Poor
Acids - dilute	Poor
Alcohols	Good
Alkalis	Good-Fair
Aromatic hydrocarbons	Good
Greases and Oils	Good
Halogenated Hydrocarbons	Good-Poor
Halogens	Poor
Ketones	Good

Mechanical Properties

Element	Value
Coefficient of friction	0.2-0.3
Hardness - Rockwell	M82
Poisson's ratio	0.39
Tensile modulus( GPa )	2.6-3
Izod impact strength( J m⁻¹ )	30-250
Abrasive resistance - ASTM D1044( mg/1000 cycles )	5
Tensile strength( MPa )	78

Electrical Properties

Element	Value
Dielectric constant @1MHz	3.6
Dissipation factor @ 1kHz	0.2
Dielectric strength( kV mm⁻¹ )	25
Surface resistivity( Ohm/sq )	5x10¹⁰
Volume resistivity( Ohmcm )	5x10¹²

Physical Properties

Element	Value
Flammability	HB
Radiation resistance	Fair
Refractive index	1.53
Resistance to Ultra-violet	Poor
Limiting oxygen index( % )	25
Water absorption - equilibrium( % )	8
Water absorption - over 24 hours( % )	2.7
Density( gcm⁻³ )	1.13

Thermal Properties

Element	Value
Heat-deflection temperature - 0.45MPa( C )	200
Heat-deflection temperature - 1.8MPa( C )	80
Lower working temperature( C )	-40
Upper working temperature( C )	80-160
Specific heat( J K⁻¹ kg⁻¹ )	1700
Thermal conductivity( W m⁻¹ K⁻¹ )	0.24-0.28@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	95