Images are for guidance only and might not represent the final product.

Nickel Straight Wire

Available Configurations

Properties common to all products in this list

Commodity: Metals Material: Nickel Form: Wire Composition: Ni CAS Number: 7440-02-0
Purity Diameter Length Temper ⓘ Other Variants
99% (2N) and 99.98% (3N8) 0.25 – 1 mm 0.1 – 1 m Annealed
Hard
Spooled

Need custom configurations? Please contact us.

Nickel Straight Wire is available in purities from 99% (2N) to 99.98% (3N8) in annealed and hard tempers, supplying cut, dimensionally stable lengths suited to applications where a defined straight form is required rather than coiled stock. The annealed condition provides maximum ductility and conductivity for electrode wires and precision resistance components; the hard temper gives greater mechanical rigidity and spring-back for probe pins, test fixtures, and structural wire elements where the wire must hold a defined geometry under mechanical load. Nickel’s ferromagnetism below 358 °C, combined with its good electrical and thermal conductivity, makes straight-cut wire well suited to magnetic sensor components, magnetometry test specimens, and reference material for magnetic property measurement where a defined, traceable pure-metal geometry is required. Its corrosion resistance in caustic alkaline environments supports use in electrode and support wire for electrochemical cells, alkaline battery components, and chemical plant fittings. In research, nickel straight wire is used as a model ferromagnetic material in surface science, as a substrate for thin-film deposition studies, and as a reference conductor in electrical metrology where well-characterized metallic properties across the full purity range are experimentally relevant.

Health hazard/Hazardous to the ozone layer

Serious health hazard

Starting at $263.00 each
No Minimum order Free technical support Free delivery from $750

Key Features

Nickel Straight Wire is available in purities from 99% (2N) to 99.98% (3N8) in annealed and hard tempers, supplying cut, dimensionally stable lengths suited to applications requiring a defined straight form:

Ferromagnetism Below 358 °C for Magnetic Sensing Applications

Nickel’s ferromagnetism below its Curie temperature of 358 °C makes straight-cut wire well suited to magnetic sensor components, magnetometry test specimens, and reference material for magnetic property measurement where a defined, traceable pure-metal geometry is required.

Two Tempers for Ductile and Rigid End Uses

The annealed condition provides maximum ductility and conductivity for electrode wires and precision resistance components. The hard temper gives greater mechanical rigidity and spring-back for probe pins, test fixtures, and structural wire elements where the wire must hold a defined geometry under mechanical load.

Straight, Cut-Length Format for Direct Integration

The straight format eliminates the straightening step required with coiled stock, maintaining dimensional precision and defined wire geometry from delivery through to assembly in electrode, contact, and structural applications.

Corrosion Resistance in Caustic Alkaline Environments

Nickel’s resistance to caustic alkalis supports use of straight wire as electrode and support elements in electrochemical cells, alkaline battery components, and chemical plant fittings exposed to strongly alkaline process environments.

Well-Characterized Properties Across the Full Purity Range

The 2N to 3N8 purity range covers general engineering uses through to research applications where well-characterized metallic properties and controlled trace impurity levels are experimentally relevant, providing a traceable substrate for surface science and metrology.

Industrial Applications

Nickel Straight Wire is used wherever the defined straight form and nickel’s ferromagnetism, corrosion resistance, or purity range determine material selection:

✦ Magnetic Sensor Components and Magnetometry Test Specimens
Used as magnetic sensor components and magnetometry test specimens, where nickel’s well-characterized ferromagnetism below 358 °C and the defined straight geometry provide a reproducible, traceable pure-metal reference for magnetic property measurement.
✦ Electrode Wire and Precision Resistance Components
Annealed wire is applied as electrode wire and precision resistance components, where maximum ductility and electrical conductivity support accurate, reliable electrical performance in demanding measurement and sensing applications.
✦ Probe Pins, Test Fixtures and Structural Wire Elements
Hard-temper wire is used in probe pins, test fixtures, and structural wire elements where mechanical rigidity and spring-back are required to maintain a defined geometry under repeated mechanical contact or sustained load.
✦ Electrochemical Cells and Alkaline Battery Components
Applied as electrode and support wire in electrochemical cells and alkaline battery components, where corrosion resistance in caustic alkaline environments ensures reliable, long-term performance in contact with alkaline electrolytes.
✦ Surface Science and Electrical Metrology Research
Used as a model ferromagnetic material in surface science experiments, as a substrate for thin-film deposition studies, and as a reference conductor in electrical metrology where well-characterized metallic properties across the purity range are experimentally relevant.

Synonyms

Ni Rigid Wire Nickel Rigid Wire Ni Straight Wire

Material Properties

Atomic Properties
Element Value
Atomic number 28
Crystal structure Face centred cubic
Electronic structure Ar 3d⁸ 4s²
Valences shown 0, 1, 2, 3
Atomic weight( amu ) 58.69
Thermal neutron absorption cross-section( Barns ) 4.54
Photo-electric work function( eV ) 4.9
Natural isotope distribution( Mass No./% ) 60/ 26.10
Natural isotope distribution( Mass No./% ) 62/ 3.59
Natural isotope distribution( Mass No./% ) 61/ 1.13
Natural isotope distribution( Mass No./% ) 58/ 68.27
Natural isotope distribution( Mass No./% ) 64/ 0.91
Atomic radius - Goldschmidt( nm ) 0.125
Ionisation potential( No./eV ) 2/ 18.2
Ionisation potential( No./eV ) 4/ 54.9
Ionisation potential( No./eV ) 6/ 108
Ionisation potential( No./eV ) 1/ 7.63
Ionisation potential( No./eV ) 3/ 35.2
Ionisation potential( No./eV ) 5/ 75.5
Mechanical Properties
Element Value
Hardness - Brinell 190
Hardness - Brinell 100
Material condition Hard
Material condition Soft
Poisson's ratio 0.312
Poisson's ratio 0.312
Bulk modulus( GPa ) 177.3
Bulk modulus( GPa ) 177.3
Tensile modulus( GPa ) 199.5
Tensile modulus( GPa ) 199.5
Izod toughness( J m⁻¹ ) 160
Izod toughness( J m⁻¹ ) 160
Tensile strength( MPa ) 400
Tensile strength( MPa ) 660
Yield strength( MPa ) 150
Yield strength( MPa ) 480
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 6.9@20°C
Temperature coefficient( K⁻¹ ) 0.0068@0-100°C
Thermal emf against Pt (cold 0C - hot 100C)( mV ) -1.48
Physical Properties
Element Value
Boiling point( C ) 2732
Density( gcm⁻³ ) 8.9@20
Density( gcm⁻³ ) 8.9@20C
Thermal Properties
Element Value
Melting point( C ) 1453
Latent heat of evaporation( J g⁻¹ ) 6378
Latent heat of fusion( J g⁻¹ ) 292
Specific heat( J K⁻¹ kg⁻¹ ) 444@25°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 90.9@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 13.3@0-100°C
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Commodity: Metals Material: Nickel Form: Wire Composition: Ni CAS Number: 7440-02-0

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Wire
Diameter ±10%
Length +5% / -1%