Images are for guidance only and might not represent the final product.
Grade: Lexan® 8B35
Formula: PC
Form: Foil/Film/Sheet
Material: Polycarbonate (PC)
CAS Number: 25766-59-0
Commodity: Polymers

Lexan® 8B28 Polycarbonate Film

Lexan® 8B35 Polycarbonate Film features a matte, low-gloss surface with uniform light diffusion, suited for optical filters, light diffusers, and protective layers in scientific instruments and laboratory equipment. Its chemical resistance and dimensional stability enable consistent performance in environments involving exposure to solvents and temperature variations. The film’s thermoformability allows for precise shaping in sensor housings and analytical device components. Commonly applied in research and development, it supports improved display readability and controlled light scattering, enhancing accuracy in diagnostic and measurement tools while maintaining material durability during repeated use.
each

We are collecting your products, please wait!...

Shipping restrictions and charges
may apply for some hazardous materials.

Tolerances

Foil
Thickness ±20%

Material Properties for Polymers

Physical Properties
Element Value
Abbe number 34
Flammability V0-V2
Radiation resistance Fair
Refractive index 1.584-6
Resistance to Ultra-violet Fair
Limiting oxygen index( % ) 25-27
Water absorption - equilibrium( % ) 0.35
Water absorption - over 24 hours( % ) 0.1
Density( gcm⁻³ ) 1.2
Chemical Resistance
Element Value
Acids - concentrated Good
Acids - dilute Good
Alcohols Good
Alkalis Good-Poor
Aromatic hydrocarbons Poor
Greases and Oils Good-Fair
Halogenated Hydrocarbons Good-Poor
Halogens Poor
Ketones Poor
Mechanical Properties
Element Value
Coefficient of friction 0.31
Hardness - Rockwell M70
Poisson's ratio 0.37
Elongation at break( % ) 100-150
Tensile modulus( GPa ) 2.3-2.4
Izod impact strength( J m⁻¹ ) 600-850
Abrasive resistance - ASTM D1044( mg/1000 cycles ) Oct-15
Tensile strength( MPa ) 55-75
Electrical Properties
Element Value
Dielectric constant @1MHz 2.9
Dissipation factor @ 1MHz 0.01
Dielectric strength( kV mm⁻¹ ) 15-67
Surface resistivity( Ohm/sq ) 10¹⁵
Volume resistivity( Ohmcm ) 10¹⁴-10¹⁶
Thermal Properties
Element Value
Heat-deflection temperature - 0.45MPa( C ) 140
Heat-deflection temperature - 1.8MPa( C ) 128-138
Lower working temperature( C ) -135
Upper working temperature( C ) 115-130
Specific heat( J K⁻¹ kg⁻¹ ) 1200
Thermal conductivity( W m⁻¹ K⁻¹ ) 0.19-0.22@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 66-70
Pultrusions
Element Value
Compressive strength( MPa ) >80

Can't find what you're looking for? For customized options

Other Customers Purchased