Images are for guidance only and might not represent the final product.

Inconel® 600 Disk

Available Configurations

Properties common to all products in this list

Grade: Inconel® 600 Composition: Ni 72/Cr 16/Fe 8 Form: Disk Material: Nickel/Chromium (Inconel®) UNS Number: N06600 European Standard: 2.4816 Commodity: Alloys
Thickness Diameter Temper ⓘ
0.0125 mm to 1 mm 4 mm to 50.8 mm As rolled
Annealed

Need custom configurations? Please contact us.

Inconel® 600 Disk (Ni 72/Cr 16/Fe 8, UNS N06600) is a solid-solution-strengthened nickel-chromium alloy in precision circular geometry, supplied in the Annealed temper, combining tensile strength of 600-1200 MPa, 50% elongation, impact toughness of 160 J/m, and a Cr2O3 and NiCr2O4 oxide system providing reliable oxidation resistance to approximately 900 °C. The Annealed temper delivers maximum ductility for stamping and deep drawing operations, and the well-characterized annealed microstructure provides a consistent starting state for both functional component production and controlled materials research. Thermal conductivity of 14.8 W/m·K and density of 8.42 g/cm³ support disk applications requiring defined thermal performance alongside structural and corrosion resistance. In industry, 600 disks are used as blanks for heat exchanger baffle plates and tube sheets in nuclear reactor steam generators, reaction vessel closures in chemical processing equipment, turbine shroud ring blanks, and nuclear component disks where high-temperature oxidation and corrosion resistance is the primary criterion. In research, they serve as specimens for oxidation and corrosion immersion testing, substrates for surface treatment and coating evaluation in nuclear and chemical environments, and reference specimens for fatigue and creep characterization at elevated temperatures in the solid-solution-strengthened Ni-Cr alloy system.

Health hazard/Hazardous to the ozone layer

Serious health hazard

Starting at $245.00 each
No Minimum order Free technical support Free delivery from $750

Key Features

Inconel® 600 Disk (Ni 72/Cr 16/Fe 8, UNS N06600) is a solid-solution-strengthened nickel-chromium alloy in precision circular geometry, supplied in the Annealed temper:

Annealed Temper: Maximum Ductility and Consistent Microstructure

The Annealed temper delivers maximum ductility for stamping and deep drawing operations, and provides a well-characterized starting microstructure for both functional component production and controlled materials research.

Tensile Strength 600–1,200 MPa, Elongation 50%, Impact Toughness 160 J/m

The combination of tensile strength, elongation, and impact toughness in the annealed state reflects the solid-solution-strengthened alloy’s balance of mechanical performance and formability.

Oxidation Resistance to ~900 °C

A Cr₂O₃ and NiCr₂O₄ oxide system provides reliable oxidation resistance to approximately 900 °C, qualifying the disk for service in nuclear and chemical environments where sustained high-temperature exposure is the primary criterion.

Thermal Conductivity 14.8 W/m·K

Defined thermal conductivity supports disk applications requiring specified thermal performance alongside structural and corrosion resistance, such as heat exchanger baffle plates and tube sheets.

Density 8.42 g/cm³

The density figure supports mass calculations for rotating components, structural elements, and reference specimens where dimensional and mass precision are both required.

Industrial Applications

Inconel® 600 Disk is used across nuclear, chemical processing, and turbine industries wherever a high-temperature corrosion-resistant circular blank or specimen is required:

✦ Heat Exchanger Baffle Plates and Tube Sheets in Nuclear Steam Generators
Used as blanks for baffle plates and tube sheets in nuclear reactor steam generators, where high-temperature oxidation resistance and corrosion resistance in primary water environments are the primary material selection criteria.
✦ Reaction Vessel Closures in Chemical Processing
Applied as reaction vessel closure blanks in chemical processing equipment, where corrosion resistance across reducing, carburizing, and oxidizing service conditions determines material selection.
✦ Turbine Shroud Ring Blanks
Used as blanks for turbine shroud ring components, where the alloy’s high-temperature mechanical performance and oxidation resistance support reliable service at elevated operating temperatures.
✦ Nuclear Component Disk Blanks
Applied as disk blanks in nuclear component manufacture where high-temperature oxidation and corrosion resistance is the primary selection criterion and the annealed condition provides a consistent starting state.
✦ Oxidation, Corrosion and Creep Research Specimens
Used as specimens for oxidation and corrosion immersion testing, substrates for surface treatment and coating evaluation in nuclear and chemical environments, and reference specimens for fatigue and creep characterization at elevated temperatures.

Synonyms

Inconel 600 Disc UNS N06600 Disc Alloy 600 Disc Inconel 600 Alloy Disc

Material Properties

Mechanical Properties
Element Value
Hardness - Brinell 120-290
Elongation at break( % ) 50
Modulus of elasticity( GPa ) 157
Izod impact strength( J m⁻¹ ) 160
Shear strength( MPa ) 420-570
Tensile strength( MPa ) 600-1200
Magnetic Properties
Element Value
Initial permeability 1.01
Curie temperature( C ) -124
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 103
Thermal Properties
Element Value
Melting point( C ) 1370-1425
Specific heat( J K⁻¹ kg⁻¹ ) 444@23°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 14.8@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 11.5-13.3@20-100°C
Physical Properties
Element Value
Density( gcm⁻³ ) 8.42
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Grade: Inconel® 600 Composition: Ni 72/Cr 16/Fe 8 Form: Disc Material: Nickel/Chromium (Inconel®) UNS Number: N06600 European Standard: 2.4816 Commodity: Alloys

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Disc
Thickness <0.01mm ±25%
Thickness 0.01mm - 0.05mm ±15%
Thickness >0.05mm ±10%
Diameter ±0.5mm