Images are for guidance only and might not represent the final product.

Chromium Foil/Sheet

Available Configurations

Properties common to all products in this list

Commodity: Metals Material: Chromium Form: Foil/Film/Sheet Composition: Cr CAS Number: 7440-47-3
Purity Thickness Sides Temper ⓘ Other Variants
99.7% (2N7) – 99.99% (4N) 0.008 – 6 mm 10 – 150 mm As Rolled
Hard
Light Tight

Need custom configurations? Please contact us.

Chromium Foil (Cr, 99.7-99.99%) is an elemental chromium product in thin flat form combining a high melting point of 1857°C, density of 7.19 g/cm³, very low coefficient of thermal expansion of 4.9 × 10⁻⁶ K⁻¹, good thermal conductivity of 93 W/m·K, electrical resistivity of 12.9 µΩcm, and a distinctive magnetic character as a type-I spin-density-wave antiferromagnet below its Néel temperature of approximately 311 K, above which it is paramagnetic. The combination of very high hardness, excellent oxidation resistance through a Cr2O3 passive film, and very low CTE make it a uniquely capable material for dimensional stability, hard coating research, and high-temperature refractory applications. In industry, chromium foil is used as a source material for physical vapor deposition of chromium thin films and coatings, as a reference substrate for hard chrome adhesion and tribological studies, as feedstock for chromium diffusion and thermal barrier coating investigations, and as a refractory foil in high-temperature furnace applications. In research, it is used for fundamental studies of antiferromagnetism and spin-density-wave phenomena at the Néel transition, for thin-film deposition parameter optimization, for corrosion and passivation studies of chromium oxide surfaces, and as a high-purity elemental specimen for surface spectroscopy and electron microscopy calibration.
Starting at $590.00 each
No Minimum order Free technical support Free delivery from $750

Key Features

Chromium Foil (Cr, 99.7–99.99%) is an elemental chromium product in thin flat form combining a high melting point, very low coefficient of thermal expansion, good thermal conductivity, and a distinctive magnetic character as a spin-density-wave antiferromagnet:

Distinctive Magnetic Character as a Spin-Density-Wave Antiferromagnet

Chromium is a type-I spin-density-wave antiferromagnet below its Néel temperature of approximately 311 K, above which it is paramagnetic. This magnetic character is unique among elemental metals and makes chromium foil the primary specimen material for fundamental studies of antiferromagnetism and spin-density-wave phenomena at and near the Néel transition.

Very Low Coefficient of Thermal Expansion

CTE of 4.9 × 10⁻⁶ K⁻¹ is among the lowest of any transition metal, qualifying chromium for dimensional stability applications, CTE-matching studies, and thermal barrier coating research where the film’s dimensional response under thermal cycling is a key parameter.

Excellent Oxidation Resistance

Formation of a continuous, self-healing Cr₂O₃ passive film provides excellent oxidation resistance and chemical passivation, establishing chromium as the reference passive oxide system for corrosion and passivation research and the basis for its use as a thin-film coating source material.

High Melting Point and Refractory Capability

Melting point of 1857 °C qualifies chromium foil for refractory furnace applications and as a source material for high-temperature physical vapour deposition processes where the target must sustain high thermal loads without melting or excessive evaporation.

Good Thermal Conductivity

Thermal conductivity of 93 W/m·K and electrical resistivity of 12.9 µΩ·cm give chromium defined thermal and electrical properties for thin-film deposition optimization and as a calibration reference in surface spectroscopy and electron microscopy.

Industrial Applications

Chromium Foil is used across physical vapour deposition, surface engineering, high-temperature refractory applications, and fundamental condensed matter physics research wherever the elemental properties of chromium determine material selection:

✦ Source Material for Physical Vapour Deposition of Chromium Thin Films
Used as source material for physical vapour deposition of chromium thin films and coatings, where the high melting point, well-characterized evaporation behavior, and high purity of the foil support consistent deposition of adhesion layers, hard coatings, and decorative chromium films.
✦ Reference Substrate for Hard Chrome Adhesion and Tribological Studies
Applied as a reference substrate for hard chrome adhesion and tribological studies, where the Cr₂O₃ passive surface and elemental composition provide a well-defined starting surface for adhesion, wear, and tribochemistry investigations.
✦ Feedstock for Chromium Diffusion and Thermal Barrier Coating Research
Used as feedstock for chromium diffusion and thermal barrier coating investigations, where the foil geometry provides controlled chromium source material for pack cementation, CVD, and diffusion aluminizing process development in high-temperature coating research.
✦ Refractory Foil in High-Temperature Furnace Applications
Applied as a refractory foil in high-temperature furnace applications, where the 1857 °C melting point and Cr₂O₃ oxidation resistance support service in oxidizing atmospheres at temperatures that would degrade most other metallic foil materials.
✦ Antiferromagnetism, Corrosion Passivation and Surface Spectroscopy Research
Used for fundamental studies of antiferromagnetism and spin-density-wave phenomena at the Néel transition, thin-film deposition parameter optimization, corrosion and passivation studies of chromium oxide surfaces, and as a high-purity elemental specimen for surface spectroscopy and electron microscopy calibration.

Synonyms

Cr Plate Chromium Strip Cr Sheeting Chromium Plate Cr Foil

Material Properties

Atomic Properties
Element Value
Atomic number 24
Crystal structure Body centred cubic
Electronic structure Ar 3d⁵ 4s¹
Valences shown 2, 3, 6
Atomic weight( amu ) 51.996
Thermal neutron absorption cross-section( Barns ) 3.1
Photo-electric work function( eV ) 4.4
Natural isotope distribution( Mass No./% ) 50/ 4.35
Natural isotope distribution( Mass No./% ) 52/ 83.79
Natural isotope distribution( Mass No./% ) 54/ 2.36
Natural isotope distribution( Mass No./% ) 53/ 9.5
Atomic radius - Goldschmidt( nm ) 0.128
Ionisation potential( No./eV ) 4/ 49.1
Ionisation potential( No./eV ) 3/ 31.0
Ionisation potential( No./eV ) 1/ 6.77
Ionisation potential( No./eV ) 6/ 90.6
Ionisation potential( No./eV ) 2/ 16.5
Ionisation potential( No./eV ) 5/ 69.3
Mechanical Properties
Element Value
Material condition Hard
Material condition Soft
Poisson's ratio 0.21
Poisson's ratio 0.21
Bulk modulus( GPa ) 160.2
Bulk modulus( GPa ) 160.2
Tensile modulus( GPa ) 279
Tensile modulus( GPa ) 279
Hardness - Vickers( kgf mm⁻² ) 130
Hardness - Vickers( kgf mm⁻² ) 220
Tensile strength( MPa ) 689
Tensile strength( MPa ) 103
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 13.2@20°C
Temperature coefficient( K⁻¹ ) 0.00214@0-100°C
Physical Properties
Element Value
Boiling point( C ) 2672
Density( gcm⁻³ ) 7.1@20°C
Thermal Properties
Element Value
Melting point( C ) 1857
Latent heat of evaporation( J g⁻¹ ) 6580
Latent heat of fusion( J g⁻¹ ) 260
Specific heat( J K⁻¹ kg⁻¹ ) 518@25°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 94@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 6.5@0-100°C
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Commodity: Metals Material: Chromium Form: Foil Composition: Cr CAS Number: 7440-47-3

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Foil
Thickness <0.01mm ±25%
Thickness 0.01mm - 0.05mm ±15%
Thickness >0.05mm ±10%
Linear dimension <100mm ±1mm
Linear dimension >=100mm +2 / -1%