Images are for guidance only and might not represent the final product.

Aluminum Powder

Available Configurations

Properties common to all products in this list

Grade: Pure (≥ 99%) Composition: Al Form: Powder Material: Aluminum CAS Number: 7429-90-5 Commodity: Metals
Purity Weight
99% (2N) – 99.9% (3N) 10 – 25000 g (0.02 – 55.12 lbs)

Need custom configurations? Please contact us.

Aluminum Powder is supplied in a pure grade of at least 99%. The low density of 2.7 g/cm³, melting point of 660.4°C and high thermal and electrical conductivity of aluminum carry over into finely divided form, where the large surface area makes the metal far more reactive than the bulk. In combustion studies and pyrotechnics that reactivity releases heat rapidly. In hydrogen generation, aluminum reacts with water to release hydrogen and form aluminum oxide or hydroxide, and finer powder reacts faster because more surface is in contact with the water. As a feedstock the powder is used in selective additive manufacturing and as a filler in metal-filled 3D printing filaments, and it is a material in catalysis and nanocomposite research. As a raw material for lightweight, high-strength alloys it serves aerospace and automotive components, where low density is the main reason for choosing aluminum.
Starting at $226.00 each
No Minimum order Free technical support Free delivery from $750

Key Features

Aluminum Powder is supplied in a pure grade of at least 99%. The low density of 2.7 g/cm³, melting point of 660.4°C and high thermal and electrical conductivity of aluminum carry over into finely divided form, where the large surface area makes the metal far more reactive than the bulk.

High surface area and reactivity

The fine particle form gives a large surface-area-to-volume ratio, making aluminum powder far more reactive than bulk metal. In combustion studies, pyrotechnics and propellant formulations this reactivity releases heat rapidly and in a controlled fashion.

Hydrogen generation through water reaction

Aluminum reacts with water to release hydrogen and form aluminum oxide or hydroxide. Finer powder reacts faster because more surface is in contact with the water, making particle size a direct handle on reaction rate in hydrogen generation systems.

Additive manufacturing feedstock

The powder is used as a feedstock in selective additive manufacturing processes and as a filler in metal-filled 3D printing filaments, allowing geometrically complex aluminum components to be fabricated directly from the powder.

Low density for lightweight alloy development

At 2.7 g/cm³, aluminum is the lowest-density structural metal. The powder serves as the raw material for lightweight, high-strength alloys in aerospace and automotive components, where low density is the primary reason for selecting aluminum.

Catalyst and nanocomposite research

The high surface area and reactivity of fine aluminum powder support its use as a material in catalysis and nanocomposite research, where particle size and morphology are controlled to tailor reactivity and matrix interaction.

Industrial Applications

Used in combustion studies, pyrotechnics, hydrogen generation, selective additive manufacturing, metal-filled 3D printing filaments, catalysis research and lightweight alloy development for aerospace and automotive applications.

✦ Propellants and pyrotechnics
Fuel component in solid rocket propellants and pyrotechnic compositions where the high reactivity and heat of combustion of aluminum powder increase energy output per unit mass of charge.
✦ Hydrogen generation systems
Reactive feedstock in aluminum-water hydrogen generation cells and portable hydrogen supply systems, where the reaction rate is controlled by particle size and surface activation.
✦ Selective additive manufacturing
Feedstock for selective laser sintering and binder jetting of aluminum components in aerospace, automotive and consumer electronics applications where geometric complexity cannot be achieved by conventional forming.
✦ Metal-filled 3D printing filaments
Filler in metal-loaded polymer filaments for material extrusion printing, producing parts with metallic appearance and elevated density for prototyping and decorative applications.
✦ Aerospace and automotive alloy development
Raw material for lightweight high-strength aluminum alloy powder metallurgy components in structural aerospace and automotive applications where the density advantage of aluminum is the primary design consideration.

Synonyms

Aluminum Powder Al Powder

Material Properties

Atomic Properties
Element Value
Atomic number 13
Crystal structure Face centred cubic
Electronic structure Ne 3s² 3p¹
Valences shown 3
Atomic weight( amu ) 26.98154
Thermal neutron absorption cross-section( Barns ) 0.232
Photo-electric work function( eV ) 4.2
Atomic radius - Goldschmidt( nm ) 0.143
Ionisation potential( No./eV ) 4/ 120
Ionisation potential( No./eV ) 5/ 154
Ionisation potential( No./eV ) 6/ 190
Ionisation potential( No./eV ) 1/ 5.99
Ionisation potential( No./eV ) 3/ 28.4
Ionisation potential( No./eV ) 2/ 18.8
Mechanical Properties
Element Value
Material condition Soft
Material condition Hard
Poisson's ratio 0.345
Poisson's ratio 0.345
Bulk modulus( GPa ) 75.2
Bulk modulus( GPa ) 75.2
Tensile modulus( GPa ) 70.6
Tensile modulus( GPa ) 70.6
Hardness - Vickers( kgf mm⁻² ) 21
Hardness - Vickers( kgf mm⁻² ) 35-48
Tensile strength( MPa ) 130-195
Tensile strength( MPa ) 50-90
Yield strength( MPa ) 110-170
Yield strength( MPa ) 10‑35
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 2.67@20°C
Superconductivity critical temperature( K ) 1.175
Temperature coefficient( K⁻¹ ) 0.0045@0-100°C
Thermal emf against Pt (cold 0C - hot 100C)( mV ) 0.42
Physical Properties
Element Value
Boiling point( C ) 2467
Density( gcm⁻³ ) 2.7@20°C
Thermal Properties
Element Value
Melting point( C ) 660.4
Latent heat of evaporation( J g⁻¹ ) 10800
Latent heat of fusion( J g⁻¹ ) 388
Specific heat( J K⁻¹ kg⁻¹ ) 900@25°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 237@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 23.5@0-100°C
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Grade: Pure (≥ 99%) Composition: Al Form: Powder Material: Aluminum CAS Number: 7429-90-5 Commodity: Metals

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Powder
Mean Particle Size Nominal
Minimum Particle Size Nominal
Maximum Particle Size Nominal
Maximum Particle Size Nominal
Particle Size D10 Nominal
Particle Size D50 Nominal
Particle Size D90 Nominal