30% Glass Fiber Reinforced Nylon 66 Film

Formula: PA 6,6 30% GFR

Form: Foil/Film/Sheet

Material: 30% Glass Fiber Reinforced Nylon 66

Commodity: Polymers

30% Glass Fiber Reinforced Nylon 66 films are engineering plastic films available from Goodfellow that contain 30% glass fiber reinforcement to strengthen the nylon 66 polymer matrix. This product comes in 14 variations that differ in dimensions, such as thickness, length, and width. These films provide high strength and rigidity, while the nylon 66 offers toughness and chemical resistance. Their combination of properties makes these reinforced plastic films suitable for parts that require dimensional stability under load. Typical applications for 30% Glass Fiber Reinforced Nylon 66 films include electrical insulators, wear pads and low friction sliding parts.

Wishlist

Technical Data Sheet Safety Data Sheet Tolerance Properties

each

Tolerances

Foil/Film/Sheet

Thickness		±20%

Material Properties for Polymers

Chemical Resistance

Element	Value
Acids - concentrated	Poor
Acids - dilute	Poor
Alcohols	Good
Alkalis	Good-Fair
Aromatic hydrocarbons	Good
Greases and Oils	Good
Halogenated Hydrocarbons	Good-Poor
Halogens	Poor
Ketones	Good-Poor

Electrical Properties

Element	Value
Dielectric constant @1MHz	3.9-5.7
Volume resistivity( Ohmcm )	10¹²-10¹⁵

Physical Properties

Element	Value
Flammability	HB
Limiting oxygen index( % )	22
Water absorption - over 24 hours( % )	01-May
Density( gcm⁻³ )	1.4

Mechanical Properties

Element	Value
Hardness - Rockwell	M84-92
Poisson's ratio	0.34-0.36
Elongation at break( % )	5
Compressive modulus( GPa )	6.6-7.2
Tensile modulus( GPa )	6.1-7.6
Izod impact strength( J m⁻¹ )	120
Tensile strength( MPa )	142-156

Thermal Properties

Element	Value
Heat-deflection temperature - 0.45MPa( C )	257
Heat-deflection temperature - 1.8MPa( C )	252
Upper working temperature( C )	80-200
Thermal conductivity( W m⁻¹ K⁻¹ )	0.23@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	30-60