Inconel® 625 Disk

Formula: Ni61/Cr22/Mo 9/Fe 5

Form: Disk

Material: Inconel® 625

Commodity: Alloys

Temper: Annealed

Hazard Pictogram: GHS07,GHS08

Available in 471 variations, Inconel® 625 disks are made from a nickel-chromium-molybdenum alloy. They offer excellent tensile, creep, and rupture strength at high temperatures. Inconel 625 also resists a wide range of corrosive environments. The properties of these disks make them suitable for uses such as gas turbines, jet engine components, heat exchangers, and chemical and pollution control equipment. All this means that Inconel® 625 disks are ideal for applications requiring high strength and corrosion resistance at high temperatures are required.

Wishlist

Technical Data Sheet Safety Data Sheet Tolerance Properties

Health hazard/Hazardous to the ozone layer

Serious health hazard

each

Tolerances

Disk

Thickness	>0.05mm	±10%
Thickness	<0.01mm	±25%
Thickness	0.01mm - 0.05mm	±15%

Material Properties for Alloys

Mechanical Properties

Element	Value
Hardness - Brinell	175-240
Elongation at break( % )	<40
Modulus of elasticity( GPa )	147-210
Tensile strength( MPa )	950

Magnetic Properties

Element	Value
Initial permeability	1.0006
Curie temperature( C )	-196

Electrical Properties

Element	Value
Electrical resistivity( µOhmcm )	129
Temperature coefficient( K⁻¹ )	-

Thermal Properties

Element	Value
Melting point( C )	1290-1350
Specific heat( J K⁻¹ kg⁻¹ )	410@23°C
Thermal conductivity( W m⁻¹ K⁻¹ )	9.8@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	12.8@20-100°C