T2 Thermocouple Alloy Rod (Ni95/(Al+Mn+Si) 5)

Formula: Ni 95/(Al+Mn+Si) 5

Form: Rod

Material: T2 Thermocouple Alloy

Commodity: Alloys

Hazard Pictogram: GHS07,GHS08

Our T2 Thermocouple Alloy Rods (Ni95/(Al+Mn+Si) 5) are available in 61 variations, with multiple diameters and lengths for use in temperature measurement and control applications. This T2 alloy is mostly composed of nickel with small quantities of aluminum, manganese and silicon, providing a wide temperature range with high stability. These rods are used in industrial processing as thermowell inserts, as well as in scientific experiments requiring precise temperature readings. With our wide selection of sizes, T2 Thermocouple Alloy Rods provide customizable solutions for temperature sensing across industries.

Wishlist

Technical Data Sheet Safety Data Sheet Tolerance Properties

Health hazard/Hazardous to the ozone layer

Serious health hazard

each

Tolerances

Rod

Diameter	=<10mm	±10%
Diameter	>10mm	±5%

Material Properties for Alloys

Magnetic Properties

Element	Value
Maximum permeability	1.07

Mechanical Properties

Element	Value
Elongation at break( % )	<44
Modulus of elasticity( GPa )	220
Izod impact strength( J m⁻¹ )	108
Tensile strength( MPa )	550-780

Electrical Properties

Element	Value
Electrical resistivity( µOhmcm )	29-33
Temperature coefficient( K⁻¹ )	0.0019

Thermal Properties

Element	Value
Maximum use temperature in air( C )	1100
Melting point( C )	1315-1390
Specific heat( J K⁻¹ kg⁻¹ )	446@23°C
Thermal conductivity( W m⁻¹ K⁻¹ )	30-32@23°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	16.8@20-1000°C