Images are for guidance only and might not represent the final product.

Platinum Flat Bottomed Micro Crucible with Pouring Lip

Available Configurations

Properties common to all products in this list

Composition: Pt Form: Crucible Material: Platinum CAS Number: 7440-06-4 Commodity: Precious Metals Purity: 99.99% (4N) Height: 2mm
Outside Diameter Other Variants
10 – 15 mm Classic
Round Bottomed with Handle and Pouring Lip

Need custom configurations? Please contact us.

Platinum Flat Bottomed Micro Crucible with Pouring Lip (99.99% purity) is an ultra-compact fusion vessel for small-scale sample preparation requiring controlled transfer of molten material. Available in OD 10 mm and OD 15 mm formats at 2 mm height, it is designed for micro-scale XRF fusion bead preparation and small-volume melt casting where precise, directed pouring from a compact platinum vessel is required. The flat base provides a stable heating footprint, and the integral pouring lip allows the fused material to be transferred cleanly to a micro-casting mold with minimal material loss. Its 99.99% pure platinum construction ensures no contamination of the melt, making it suitable for high-sensitivity trace element analysis on small or precious samples. Typical applications include micro-scale geological and mineralogical sample fusion for XRF analysis, small-volume synthesis of flux-grown crystals, and preparative fusion work in research environments where sample quantity is severely constrained.
Starting at $890.00 each

Key Features

This platinum micro crucible is a flat bottomed fusion vessel with an integral pouring lip, supplied in compact formats and selected for its high purity and controlled melt transfer.

High Purity Platinum

The crucible is fabricated entirely from platinum at 99.99% purity. At this grade, the metal of the vessel body is effectively free of the impurities present in lower purity grades. The composition of the crucible is therefore well defined, which is the primary reason for choosing it when the identity of the melt must remain unaltered.

Non-Contaminating Melt Contact

Because the vessel is pure platinum, the walls in contact with the molten charge do not introduce contamination into the melt. The fused material leaves the crucible with the same chemistry it had when loaded, apart from any intended flux additions. This makes the result of the fusion a reliable representation of the original sample composition.

Flat Base Stability

The crucible has a flat bottomed profile that sits squarely on a heating surface or support. This provides a stable footprint during heating, reducing the risk of tipping when the vessel holds a molten charge. A flat base also gives a consistent contact area with the heat source, supporting even and repeatable heating of the contents.

Integral Pouring Lip

A pouring lip is formed as an integral part of the crucible rim rather than added as a separate piece. The lip directs the flow of molten material as the vessel is tilted, allowing the fused charge to be transferred cleanly to a receiving vessel. Directed pouring keeps material loss to a minimum during transfer.

Ultra-Compact Format

The crucible is made to an ultra-compact micro scale with a low profile. Its small internal volume is matched to very small charges, so only a limited quantity of material is needed for each melt. Two diameter formats are offered, both at the same low height, allowing vessel capacity to be matched closely to the size of the charge.

Industrial Applications

Analytical laboratories and research groups select this crucible for micro-scale fusion and melt transfer work where sample quantities are severely limited and results must be precise.

✦ XRF Fusion Bead Preparation
In X-ray fluorescence laboratories, the crucible is used to prepare fusion beads at micro scale. The sample and flux are melted together and the resulting glass is poured into a micro-casting mold to form a bead for measurement. This route allows XRF beads to be produced when only a fraction of the usual sample mass is available.
✦ Geological and Mineralogical Samples
Geoscience laboratories use the crucible to fuse small quantities of rock and mineral material ahead of XRF analysis. It is applied where only limited material can be taken from a specimen, as with rare or precious geological samples. Working at micro scale allows these materials to be characterized while preserving as much of the original specimen as possible.
✦ Trace Element Analysis
The crucible supports high-sensitivity trace element determinations on small or precious samples. Analysts use it to prepare fused specimens where low element concentrations must be quantified accurately. It is chosen for workflows in which the sample cannot be replaced and a single fusion must yield a dependable analytical result on the first attempt.
✦ Flux-Grown Crystal Synthesis
Materials researchers use the crucible for small-volume synthesis of crystals grown from a flux. Starting compounds and flux are melted together in the vessel, making it suited to exploratory runs where reagents are scarce or costly. Working at this scale allows new compositions and growth conditions to be screened quickly before committing to larger batches.
✦ Preparative Melt Casting
In research laboratories, the crucible is used for preparative fusion and small-volume melt casting where sample quantity is severely constrained. Fused material is poured directly into micro-casting molds to produce small cast specimens for further study. It suits academic and institutional groups handling limited, irreplaceable, or experimental materials that cannot be prepared in larger quantities.

Synonyms

Pt Flat Bottomed Micro Crucible with Pouring Lip Platinum Flat-Bottom Microcrucible with Spout Small Platinum Pouring Crucible Pt Microcrucible with Lip Platinum Mini Crucible with Pouring Lip

Material Properties

Atomic Properties
Element Value
Atomic number 78
Crystal structure Face centred cubic
Electronic structure Xe 4f¹⁴ 5d⁹ 6s¹
Valences shown 1,2,3,4
Atomic weight( amu ) 195.08
Thermal neutron absorption cross-section( Barns ) 9
Photo-electric work function( eV ) 5.3
Natural isotope distribution( Mass No./% ) 192/ 0.79
Natural isotope distribution( Mass No./% ) 196/ 25.30
Natural isotope distribution( Mass No./% ) 190/ 0.01
Natural isotope distribution( Mass No./% ) 195/ 33.80
Natural isotope distribution( Mass No./% ) 198/ 7.20
Natural isotope distribution( Mass No./% ) 194/ 32.90
Atomic radius - Goldschmidt( nm ) 0.138
Ionisation potential( No./eV ) 1/ 9.0
Ionisation potential( No./eV ) 2/ 18.6
Mechanical Properties
Element Value
Material condition Hard
Material condition Soft
Poisson's ratio 0.39
Poisson's ratio 0.39
Bulk modulus( GPa ) 276
Bulk modulus( GPa ) 276
Tensile modulus( GPa ) 170
Tensile modulus( GPa ) 170
Hardness - Vickers( kgf mm⁻² ) 40
Hardness - Vickers( kgf mm⁻² ) 100
Tensile strength( MPa ) 200-300
Tensile strength( MPa ) 125-150
Yield strength( MPa ) 14-35
Yield strength( MPa ) 185
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 10.58@20°C
Temperature coefficient( K⁻¹ ) 0.00392@0-100°C
Physical Properties
Element Value
Boiling point( C ) 3827
Density( gcm⁻³ ) 21.45@20°C
Thermal Properties
Element Value
Melting point( C ) 1772
Latent heat of evaporation( J g⁻¹ ) 2405
Latent heat of fusion( J g⁻¹ ) 101
Specific heat( J K⁻¹ kg⁻¹ ) 133@025°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 71.6@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 9@0-100
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Composition: Pt Form: Crucible Material: Platinum CAS Number: 7440-06-4 Commodity: Precious Metals Purity: 99.99% (4N) Height: 2mm

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.