Images are for guidance only and might not represent the final product.

Phosphor Bronze Foil/Sheet (Cu95-Sn5)

Available Configurations

Properties common to all products in this list

Commodity: Alloys Material: Phosphor Bronze Form: Foil/Film/Sheet Composition: Cu 95/Sn 5 UNS Number: C51000
Thickness Size Other Variants
1.22 – 1.63 mm 10 × 10 – 1000 × 2000 mm Cu92-Sn8
Cu94-Sn6

Need custom configurations? Please contact us.

Phosphor Bronze Foil/Sheet (Cu95-Sn5) is supplied in the as-rolled condition to UNS C51000 and European designation CW451K, and is chosen where a flat part must act as both a spring and an electrical conductor. The 5% tin strengthens the copper by solid-solution hardening and improves corrosion resistance, while phosphorus deoxidizes the alloy, giving sound metal that solders and electroplates well. Work hardening retained from rolling provides spring properties directly, so contacts can be blanked and formed without a separate hardening step. Battery contact springs rely on this to deliver a set contact force, and the alloy's resistance to stress relaxation helps hold that force over the service life. Stamped terminal strips use the spring-back to grip the wire conductor, and shim stock uses the hardness to resist deformation under clamping load. Main users are manufacturers of consumer electronics, automotive electronics and industrial control equipment.
Starting at $196.71 each

Key Features

Phosphor Bronze Foil/Sheet (Cu95-Sn5) is a copper-tin-phosphorus alloy supplied as rolled, selected where a flat part must function as both a spring and an electrical conductor.

Solid-Solution Strengthening

The alloy contains 5% tin dissolved in the copper matrix, which strengthens the metal through solid-solution hardening. The tin atoms distort the copper lattice and impede dislocation movement, raising strength above that of unalloyed copper. This strengthening mechanism is inherent to the composition and works with the work hardening introduced during rolling to give the as-rolled foil its mechanical properties.

Corrosion Resistance

The tin addition improves the corrosion resistance of the alloy compared with unalloyed copper. This benefit comes from the same 5% tin content that provides solid-solution strengthening, so improved durability in service is gained without a separate alloying addition. The foil therefore combines higher strength and better resistance to corrosive attack within a single copper-based composition.

Phosphorus Deoxidation

Phosphorus is added as a deoxidizer, removing oxygen from the molten alloy during production. This yields sound metal with low porosity and few oxide inclusions. The clean, deoxidized structure gives the foil good solderability and makes it well suited to electroplating, as surfaces wet readily and plated layers adhere consistently to the base metal.

As Rolled Spring Properties

The foil is supplied in the as-rolled condition, retaining the work hardening introduced during cold rolling. This retained work hardening provides spring properties directly, so no separate hardening or heat treatment step is required. Parts can be blanked and formed from the foil as supplied while still developing the spring-back needed for elastic recovery after deflection.

Stress Relaxation Resistance

The alloy resists stress relaxation, meaning that a spring element held under constant deflection loses little of its force over time. This allows a set force established at forming or assembly to be maintained through extended service. Combined with the work-hardened as-rolled temper, this behavior gives stable, long-term spring performance from a copper-based foil.

Industrial Applications

Manufacturers of consumer electronics, automotive electronics and industrial control equipment select this foil for flat stamped parts that must combine spring action with electrical conduction.

✦ Battery Contact Springs
Battery contact springs are blanked and formed from the foil to press against cell terminals and complete the circuit. They deliver a set contact force that keeps the battery seated and electrically connected, and hold that force across the service life of the device. This supports reliable power delivery to the circuitry of battery-powered products.
✦ Stamped Terminal Strips
Terminal strips are stamped from the foil, with each formed terminal using spring-back to grip the wire conductor. This gripping action holds the wire in place and maintains electrical continuity at the connection point. Stamped terminal strips are used to terminate wiring within electronic and electrical equipment, where many connections must be made consistently from a single strip.
✦ Shim Stock
As shim stock, the foil is cut to shape and placed between mating components to set spacing or alignment. Under clamping load from bolts or fasteners, the shim resists deformation and holds its intended position, keeping the assembly within its set tolerances. This makes it suitable for precise packing and adjustment in mechanical and electrical equipment assemblies.
✦ Consumer Electronics
Consumer electronics manufacturers use the foil for battery contacts, terminals and other small spring components in portable and plug-in devices. These parts must make dependable electrical connections inside compact housings and are produced in high volumes on progressive stamping lines. Typical uses include battery compartments, internal power connections and wire terminations within finished products.
✦ Automotive Electronics
Automotive electronics manufacturers use the foil for spring contacts and stamped terminals within vehicle electronic modules and wiring assemblies. These components must provide dependable connections over the long service life expected of vehicles. Producing these parts by stamping from the foil suits the consistent, high-volume output that automotive electronics manufacturing requires.

Synonyms

C51000 Phosphor Bronze Foil CuSn5 Phosphor Bronze Sheet PB102 Phosphor Bronze Strip CW451K Bronze Sheet Cu95Sn5 Foil
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Commodity: Alloys Material: Phosphor Bronze Form: Foil/Film/Sheet Composition: Cu 95/Sn 5 UNS Number: C51000

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.

Tolerances

Foil/Film/Sheet
Thickness <0.01mm ±25%
Thickness 0.01mm - 0.05mm ±15%
Thickness >0.05mm ±10%
Linear dimension <100mm ±1mm
Linear dimension >=100mm +2 / -1%