Molybdenum Top Hat Single Crystal

Molybdenum Top Hat Single Crystal provides exceptional thermal conductivity, high melting point, and structural integrity in a precision-machined geometry with controlled crystallographic orientation. The single-crystal nature eliminates grain boundaries, enhancing uniform electron transport and resistance to creep under high stress. Industries such as semiconductors, optics, and nuclear systems employ these components in X-ray targets, epitaxial film substrates, and high-precision thermal management assemblies. Specific applications include electron microscopy calibration standards, vacuum device components, and thin-film growth requiring defect-free surfaces. Research uses extend to studies of anisotropic thermal expansion, defect-free crystal growth, and performance under extreme irradiation environments. The top-hat geometry enables reliable mechanical mounting while ensuring uniform distribution of thermal and electrical loads, reinforcing its role as a specialized material for high-precision scientific instruments and demanding industrial applications.

Formula: Mo
Percentage Purity: 99.999%
Top Section Thickness: 1mm
Bottom Section Thickness: 1mm
Outside Diameter: 10mm
Inside Diameter: 8mm
Orientation: -110
Orientation Accuracy: =< 1°
Polish: Polished
Surface Finish: =< 0.03µm Ra
CAS Number: 7439-98-7
UOM Code: 624-827-81
Legacy Code: MO002039
Distributor Code: GF62482781

SKU: 1000170049

Product Code: MO00-SC-000201

Wishlist

Tolerances

Single Crystal

Orientation		See Item
Thickness		+2% / -1%
Length		+2% / -1%

Top Hat

Inside Diameter		+2% / -1%
Outside Diameter		+2% / -1%
Bottom Section Thickness		+2% / -1%
Top Section Thickness		+2% / -1%

Tolerances

Single Crystal

Orientation		See Item
Thickness		+2% / -1%
Length		+2% / -1%

Top Hat

Inside Diameter		+2% / -1%
Outside Diameter		+2% / -1%
Bottom Section Thickness		+2% / -1%
Top Section Thickness		+2% / -1%

Technical Data Sheet

Download Print

Safety Data Sheet

$3,510.00

each

No Minimum order Free technical support *Free delivery worldwide

Material Properties for Metals

Atomic Properties

Element	Value
Atomic number	42
Crystal structure	Body centred cubic
Electronic structure	Kr 4d⁵ 5s¹
Valences shown	2, 3, 4, 5, 6
Atomic weight( amu )	95.94
Thermal neutron absorption cross-section( Barns )	2.65
Photo-electric work function( eV )	4.2
Natural isotope distribution( Mass No./% )	95/ 15.9
Natural isotope distribution( Mass No./% )	96/ 16.7
Natural isotope distribution( Mass No./% )	98/ 24.1
Natural isotope distribution( Mass No./% )	97/ 9.6
Natural isotope distribution( Mass No./% )	92/ 14.8
Natural isotope distribution( Mass No./% )	94/ 9.3
Natural isotope distribution( Mass No./% )	100/ 9.6
Atomic radius - Goldschmidt( nm )	0.14
Ionisation potential( No./eV )	2/ 16.15
Ionisation potential( No./eV )	5/ 61.2
Ionisation potential( No./eV )	68
Ionisation potential( No./eV )	1/ 7.10
Ionisation potential( No./eV )	3/ 27.2
Ionisation potential( No./eV )	4/ 46.4

Mechanical Properties

Element	Value
Material condition	Hard
Material condition	Soft
Poisson's ratio	0.293
Poisson's ratio	0.293
Bulk modulus( GPa )	261.2
Bulk modulus( GPa )	261.2
Tensile modulus( GPa )	324.8
Tensile modulus( GPa )	324.8
Hardness - Vickers( kgf mm⁻² )	250
Hardness - Vickers( kgf mm⁻² )	200
Tensile strength( MPa )	485-550
Tensile strength( MPa )	620-690
Yield strength( MPa )	550
Yield strength( MPa )	415-450

Electrical Properties

Element	Value
Electrical resistivity( µOhmcm )	5.7@20@20°C
Superconductivity critical temperature( K )	0.915
Temperature coefficient( K⁻¹ )	0.00435@0-100°C
Thermal emf against Pt (cold 0C - hot 100C)( mV )	1.45

Physical Properties

Element	Value
Boiling point( C )	4612
Density( gcm⁻³ )	10.22@20°C

Thermal Properties

Element	Value
Melting point( C )	2617
Latent heat of evaporation( J g⁻¹ )	6153
Latent heat of fusion( J g⁻¹ )	290
Specific heat( J K⁻¹ kg⁻¹ )	251@25°C
Thermal conductivity( W m⁻¹ K⁻¹ )	138@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	5.1@0-100°C