Magnesium Disk

Magnesium disks offer low density and a high strength-to-weight ratio. Available in 733 variations, these disks are commonly used in aerospace applications where weight savings are critical. They’re also valued by manufactures of medical devices and consumer electronics seeking to minimize weight. With our broad selection of Magnesium disks, engineers and designers can achieve the lightweight strength they need for their specific application.

Formula: Mg
Percentage Purity: 99.9%
Temper: As Rolled
Thickness: 0.5mm
Diameter: 25.4mm
CAS Number: 7439-95-4
UOM Code: 114-439-18
Legacy Code: MG000320
Distributor Code: GF11443918

SKU: 1000026697

Product Code: MG00-FL-000220

Wishlist

Tolerances

Disk

Thickness	>0.05mm	±10%
Thickness	<0.01mm	±25%
Thickness	0.01mm - 0.05mm	±15%

Tolerances

Disk

Thickness	>0.05mm	±10%
Thickness	<0.01mm	±25%
Thickness	0.01mm - 0.05mm	±15%

Technical Data Sheet

Download Print

Safety Data Sheet

$234.67

each

Buy 5 for $190.08 each and save 19%
Buy 10 for $173.65 each and save 26%

No Minimum order Free technical support *Free delivery worldwide

Material Properties for Metals

Atomic Properties

Element	Value
Atomic number	12
Crystal structure	Hexagonal close packed
Electronic structure	Ne 3s²
Valences shown	2
Atomic weight( amu )	24.305
Thermal neutron absorption cross-section( Barns )	0.064
Photo-electric work function( eV )	3.66
Natural isotope distribution( Mass No./% )	24/ 78.99
Natural isotope distribution( Mass No./% )	26/ 11.01
Natural isotope distribution( Mass No./% )	25/ 10.00
Atomic radius - Goldschmidt( nm )	0.16
Ionisation potential( No./eV )	2/ 15.03
Ionisation potential( No./eV )	6/ 187
Ionisation potential( No./eV )	4/ 109
Ionisation potential( No./eV )	5/ 141
Ionisation potential( No./eV )	1/ 7.65
Ionisation potential( No./eV )	3/ 80.1

Mechanical Properties

Element	Value
Material condition	Hard
Material condition	Soft
Poisson's ratio	0.291
Poisson's ratio	0.291
Bulk modulus( GPa )	35.6
Bulk modulus( GPa )	35.6
Tensile modulus( GPa )	44.7
Tensile modulus( GPa )	44.7
Hardness - Vickers( kgf mm⁻² )	35-45
Hardness - Vickers( kgf mm⁻² )	30-35
Tensile strength( MPa )	232
Tensile strength( MPa )	185
Yield strength( MPa )	69
Yield strength( MPa )	100

Electrical Properties

Element	Value
Electrical resistivity( µOhmcm )	4.2@20@20°C
Temperature coefficient( K⁻¹ )	0.00425@0-100°C
Thermal emf against Pt (cold 0C - hot 100C)( mV )	0.44

Physical Properties

Element	Value
Boiling point( C )	1090
Density( gcm⁻³ )	1.74@20°C

Thermal Properties

Element	Value
Melting point( C )	649
Latent heat of evaporation( J g⁻¹ )	5254
Latent heat of fusion( J g⁻¹ )	362
Specific heat( J K⁻¹ kg⁻¹ )	1020@25°C
Thermal conductivity( W m⁻¹ K⁻¹ )	156@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ )	26@0-100°C