Supporting cutting edge research and development with advanced materials to your needs.
High performance materials for extreme conditions.
Innovative and lightweight materials with high mechanical properties and durability.
Materials used in chemical engineering from consumables to innovative solutions.
Advanced materials characterized by high electrical or insulation performance.
High quality materials for renewable energy.
Biocompatible and biodegradable materials to the highest standards.
High purity, biocompatible materials for high performance devices and applications.
High purity materials and crucibles suitable to your needs.
State of the art materials for the next generation of technologies.
High performance materials for extreme conditions.
Durable materials for corrosive environments.
Foils, disks or windows across a range of materials to facilitate innovation.
Polymers, metal foils, and sustainable materials for your packaging needs.
Our 170,000+ range of products can cater to all your research needs.
A variety of specialist materials to support space technology needs.
Highest quality materials including graphite and lithium compounds.
High purity materials to benefit your evaporation processes.
Thin, alkali-free, borosilicate glass for LCD displays to electronic packaging applications.
Ground-breaking graphene-based nanocomposites for regenerative medicine to R&D.
An industry-leading polyimide foil by DuPont™.
A high-performance para-aramid fiber revolutionizing materials science.
A machinable glass ceramic material offering higher performance, reliability, and durability.
This versatile polyester thin film by DuPont™.
It has excellent heat and flame-resistant properties from DuPont™.
A ceramic that addresses the traditional issues of brittleness, fragility, and hardness.
This range of high purity alumina (HPA) powders has exceptional purity levels, making it one of the purest forms of alumina commercially available.
This high temperature insulation material has exceptional properties and versatile applications.
This transparent, heat resistant polyolefin resin has unique properties for a range of applications.
Toggle Nav
Formula: PA 6,6
Form: Gauze
Material: Nylon 66
CAS Number: 32131-17-2
Commodity: Polymers
Thickness:
0.07mm
Threads/cm:
110.0
Open Area:
32%
Nominal Aperture:
50μm
Monofilament Diameter:
39mm
Nylon 66 Plain Weave Gauze is part of Goodfellow's range of gauzes and is available in 10 variations. Nylon 66 Plain Weave Gauzes exhibit good strength, abrasion resistance and chemical resistance. They also have low moisture absorption compared to other nylons. These properties make Nylon 66 Plain Weave Gauze suitable for applications like food processing equipment, bearings, bushings, and other industrial parts where durability and chemical resistance are needed.
Tolerances
Gauze
| Linear dimension | <100mm | ±1mm |
|---|---|---|
| Linear dimension | >=100mm | +2% / -1% |
| Wire Diameter | Woven | ±10% |
Material Properties for Polymers
Chemical Resistance
| Element | Value |
|---|---|
| Acids - concentrated | Poor |
| Acids - dilute | Poor |
| Alcohols | Good |
| Alkalis | Good-Fair |
| Aromatic hydrocarbons | Good |
| Greases and Oils | Good |
| Halogenated Hydrocarbons | Good-Poor |
| Halogens | Poor |
| Ketones | Good |
Mechanical Properties
| Element | Value |
|---|---|
| Coefficient of friction | 0.2-0.3 |
| Hardness - Rockwell | M89 |
| Poisson's ratio | 0.41 |
| Elongation at break( % ) | 40 |
| Tensile modulus( GPa ) | 3.3 |
| Izod impact strength( J m⁻¹ ) | 40-110 |
| Abrasive resistance - ASTM D1044( mg/1000 cycles ) | 03-May |
| Tensile strength( MPa ) | 82 |
Electrical Properties
| Element | Value |
|---|---|
| Dielectric constant @1MHz | 3.4 |
| Dissipation factor @ 1kHz | 0.2 |
| Dielectric strength( kV mm⁻¹ ) | 25 |
| Surface resistivity( Ohm/sq ) | 10¹¹ |
| Volume resistivity( Ohmcm ) | 10¹³ |
Physical Properties
| Element | Value |
|---|---|
| Flammability | HB |
| Radiation resistance | Fair |
| Refractive index | 1.53 |
| Resistance to Ultra-violet | Poor |
| Limiting oxygen index( % ) | 23 |
| Water absorption( % ) | 8.5 |
| Water absorption - equilibrium( % ) | 8 |
| Water absorption - over 24 hours( % ) | 2.3 |
| Density( gcm⁻³ ) | 1.14 |
Thermal Properties
| Element | Value |
|---|---|
| Heat-deflection temperature - 0.45MPa( C ) | 200 |
| Heat-deflection temperature - 1.8MPa( C ) | 100 |
| Lower working temperature( C ) | -30 |
| Upper working temperature( C ) | 80-180 |
| Specific heat( J K⁻¹ kg⁻¹ ) | 1670 |
| Thermal conductivity( W m⁻¹ K⁻¹ ) | 0.25@23°C |
| Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) | 90 |