Images are for guidance only and might not represent the final product.

Platinum Round Bottomed Micro Crucible with Handle and Pouring Lip

Available Configurations

Properties common to all products in this list

Composition: Pt Form: Crucible Material: Platinum CAS Number: 7440-06-4 Commodity: Precious Metals Purity: 99.99% (4N)
Outside Diameter Height Other Variants
15 – 22 mm 8 – 11 mm Classic

Need custom configurations? Please contact us.

Platinum Round Bottomed Micro Crucible with Handle and Pouring Lip (99.99% purity) combines a hemispherical base geometry with an integral handle and pouring lip for micro-scale fusion and melt transfer applications. Available in OD 15 mm and OD 22 mm formats, the round bottom promotes mixing and swirling of the melt during fusion, improving flux dissolution and sample homogenization compared to flat-bottomed formats at small working volumes. The handle allows direct manipulation of the hot crucible without tongs in applications where tong contact risks deformation of a micro-scale platinum vessel, and the pouring lip enables clean, directed transfer of the fused material to a micro-mold or receiving vessel. Manufactured from 99.99% pure platinum, it is suited to micro-scale XRF fusion bead preparation, small-volume synthesis of flux-grown crystals, and research fusion workflows where active mixing during fusion and clean bead release from a very small vessel are both process requirements.
Starting at £860.00 each

Key Features

A 99.99% pure platinum micro crucible supplied as a finished round-bottomed vessel with integral handle and pouring lip, selected for active melt mixing at small volumes.

High Purity Platinum

The crucible is manufactured from 99.99% pure platinum throughout, with the handle and pouring lip formed as integral features of the same metal. This high purity grade limits the risk of metallic contamination passing from the vessel into the melt, helping to preserve the composition of the fused material during heating and subsequent transfer.

Hemispherical Base Geometry

The base of the crucible follows a hemispherical profile rather than a flat floor. This geometry promotes mixing and swirling of the melt during fusion, improving flux dissolution and sample homogenization compared with flat-bottomed formats. The effect is particularly relevant at small working volumes, where uniform circulation of a limited quantity of melt is otherwise more difficult to achieve.

Integral Handle

An integral handle allows the hot crucible to be manipulated directly, without gripping the vessel body with tongs. Tong contact risks deforming a micro-scale platinum vessel, so the handle provides a dedicated point of contact that keeps gripping force away from the walls and base. This helps preserve the hemispherical geometry on which mixing performance during fusion depends.

Pouring Lip

A formed pouring lip on the rim gives a defined exit point for the melt. It enables clean, directed transfer of fused material out of the crucible, reducing the tendency of the melt to run along the outer wall or spread unevenly when the vessel is tilted. Controlled pouring is important when working with small melt quantities.

Micro-Scale Format

The crucible is produced in a micro-scale format and is offered in two outer diameter sizes. The small working volume suits fusion of limited sample or reagent quantities, and the combination of round base, handle, and pouring lip supports both active mixing during fusion and clean release of the melt from a very small vessel.

Industrial Applications

Selected by analytical, materials synthesis, and research laboratories carrying out fusion and melt transfer on small sample quantities requiring a dedicated micro-scale platinum vessel.

✦ XRF Fusion Bead Preparation
Used to prepare fusion beads for X-ray fluorescence analysis at micro scale, where only small quantities of sample are available or required. The sample is fused with flux in the crucible, and the resulting melt is poured into a micro-mold to form a bead. The format supports laboratories working toward reliable bead formation from limited starting material.
✦ Flux-Grown Crystal Synthesis
Applied to small-volume synthesis of flux-grown crystals, where starting materials are dissolved in a molten flux and crystals form as the melt cools. Working at micro scale allows exploratory growth runs using limited quantities of precursor, and the fused material can be handled and transferred directly from the crucible once the synthesis step is complete.
✦ Research Fusion Workflows
Suited to research fusion workflows conducted at reduced scale. Typical use includes method development, trial fusions, and comparative studies, allowing researchers to evaluate flux and sample combinations while conserving material. The crucible fits processes in which the fused product must be recovered as a discrete bead from a small vessel at the end of each run.
✦ Micro-Mold Melt Transfer
Used where fused material must be transferred from the crucible into a micro-mold or other small receiving vessel. Typical steps include pouring a finished melt to cast a bead, or moving fused material to a separate container for cooling or further processing. This supports workflows in which fusion and casting are performed as distinct, sequential operations.
✦ Manual Hot Transfer Operations
Suited to laboratory setups in which the operator moves the crucible by hand between the heat source and the casting or receiving station while it is still hot. This is common in manual fusion procedures at micro scale, where small vessels are handled frequently and where loss or spillage of a limited melt volume would compromise the run.

Synonyms

Pt Round Bottomed Micro Crucible with Handle and Pouring Lip Platinum Round-Bottom Microcrucible with Handle and Spout Small Handled Platinum Pouring Crucible Pt Microcrucible with Handle Platinum Mini Crucible with Handle and Lip

Material Properties

Atomic Properties
Element Value
Atomic number 78
Crystal structure Face centred cubic
Electronic structure Xe 4f¹⁴ 5d⁹ 6s¹
Valences shown 1,2,3,4
Atomic weight( amu ) 195.08
Thermal neutron absorption cross-section( Barns ) 9
Photo-electric work function( eV ) 5.3
Natural isotope distribution( Mass No./% ) 192/ 0.79
Natural isotope distribution( Mass No./% ) 196/ 25.30
Natural isotope distribution( Mass No./% ) 190/ 0.01
Natural isotope distribution( Mass No./% ) 195/ 33.80
Natural isotope distribution( Mass No./% ) 198/ 7.20
Natural isotope distribution( Mass No./% ) 194/ 32.90
Atomic radius - Goldschmidt( nm ) 0.138
Ionisation potential( No./eV ) 1/ 9.0
Ionisation potential( No./eV ) 2/ 18.6
Mechanical Properties
Element Value
Material condition Hard
Material condition Soft
Poisson's ratio 0.39
Poisson's ratio 0.39
Bulk modulus( GPa ) 276
Bulk modulus( GPa ) 276
Tensile modulus( GPa ) 170
Tensile modulus( GPa ) 170
Hardness - Vickers( kgf mm⁻² ) 40
Hardness - Vickers( kgf mm⁻² ) 100
Tensile strength( MPa ) 200-300
Tensile strength( MPa ) 125-150
Yield strength( MPa ) 14-35
Yield strength( MPa ) 185
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 10.58@20°C
Temperature coefficient( K⁻¹ ) 0.00392@0-100°C
Physical Properties
Element Value
Boiling point( C ) 3827
Density( gcm⁻³ ) 21.45@20°C
Thermal Properties
Element Value
Melting point( C ) 1772
Latent heat of evaporation( J g⁻¹ ) 2405
Latent heat of fusion( J g⁻¹ ) 101
Specific heat( J K⁻¹ kg⁻¹ ) 133@025°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 71.6@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 9@0-100
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Composition: Pt Form: Crucible Material: Platinum CAS Number: 7440-06-4 Commodity: Precious Metals Purity: 99.99% (4N)

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.