Images are for guidance only and might not represent the final product.

Platinum Flat Bottomed Crucible with Handle and Pouring Lip

Available Configurations

Properties common to all products in this list

Composition: Pt Form: Crucible Material: Platinum CAS Number: 7440-06-4 Commodity: Precious Metals Purity: 99.99% (4N) Outside Diameter: 40mm Inside Diameter: 30mm Height: 30mm
Other Variants
Platinum Flat Bottomed Crucible
Platinum Flat Bottomed Crucible with Pouring Lip

Need custom configurations? Please contact us.

Platinum Flat Bottomed Crucible with Handle and Pouring Lip (99.99% purity) is designed for safe manual handling of the heated crucible in workflows where the operator must transfer, tilt, or position the vessel while it is still at or near working temperature. Available at OD 40 mm with a 30 mm height, the integral handle allows the crucible to be manipulated directly from the furnace without tongs in applications where tong contact risks deformation or melt disturbance, while the pouring lip enables controlled, directed transfer of fused or molten material. Manufactured from 99.99% pure platinum, it is suited to XRF fusion sample preparation and small-volume melt work in laboratory settings where workflow efficiency and operator safety during hot handling are both design priorities. Goodfellow supplies this crucible with full material certification suitable for analytical and quality control laboratory environments.
Contact us for pricingPOA

Key Features

This 99.99% pure platinum crucible with flat bottom, integral handle, and pouring lip is supplied with full material certification and selected where safe manual handling at temperature is required.

High Purity Platinum

The crucible is manufactured from platinum with a purity of 99.99%. This high purity level defines the composition of every surface in contact with the contained material, giving a consistent and known vessel chemistry. The metal is used in its pure form rather than as an alloy, so the material composition is uniform throughout the body, handle, and lip.

Integral Handle

An integral handle is formed as part of the crucible rather than attached as a separate fitting. It provides a fixed grip point so the vessel can be lifted, tilted, and positioned directly while at or near working temperature. Handling through the handle avoids tong contact on the crucible walls, reducing the risk of deformation of the vessel body.

Pouring Lip

A formed pouring lip on the crucible rim directs the flow of fused or molten contents as the vessel is tilted. The lip concentrates the stream at a single defined point, giving controlled and directed transfer rather than uneven spillage over the full rim. This allows the contents to be emptied with greater precision during hot handling.

Flat Bottomed Geometry

The crucible has a flat base, giving it a stable footprint when set down on a level surface. The flat bottom allows the vessel to stand upright without additional support, which keeps the contents level and steady between handling steps. This geometry complements the handle and lip by providing a secure resting position before and after transfer.

Material Certification

Each crucible is supplied with full material certification documenting the platinum used in its manufacture. The certification confirms the stated purity and provides a traceable record of the material supplied. This documentation supports formal record keeping and verification requirements where the composition of vessels must be confirmed and retained as part of a quality system.

Industrial Applications

Laboratory analysts and sample preparation technicians select this crucible for workflows that require hot vessels to be transferred, tilted, and emptied directly from the furnace by hand.

✦ XRF Fusion Sample Preparation
In XRF fusion work, the crucible holds the sample and flux mixture while it is fused in the furnace. Once fusion is complete, the operator removes the vessel and transfers the melt for casting into a bead or further processing. This supports a direct furnace-to-casting sequence within routine analytical sample preparation for X-ray fluorescence measurement.
✦ Small-Volume Melt Work
Laboratories carrying out small-volume melting use the crucible to contain and process limited quantities of material at working temperature. It suits experimental and preparative melts where only modest volumes are required for each run. The vessel allows these melts to be prepared, handled, and emptied within a compact laboratory workflow without dedicated large-scale melting equipment.
✦ Hot Transfer From the Furnace
Operators use the crucible where a heated vessel must be withdrawn from the furnace and moved immediately to the next stage. This applies in workflows where the melt must remain undisturbed during handling. Direct manual transfer shortens the time between furnace and pouring station, helping maintain consistent conditions across repeated sample preparation cycles.
✦ Melt Pouring Operations
In pouring operations, the crucible is used to empty fused or molten material into molds, dishes, or receiving vessels. Analysts rely on this step to deliver the full melt to a defined target with minimal loss. Accurate transfer helps preserve sample integrity, which is important when the poured material forms the basis of later measurement.
✦ Analytical and Quality Control Laboratories
Analytical and quality control laboratories use the crucible within documented sample preparation procedures. It fits environments where every stage of preparation is recorded and reviewed as part of routine testing. The crucible supports laboratories that treat workflow efficiency and operator safety during hot handling as equal design priorities when selecting fusion and melting vessels.

Synonyms

Pt Flat Bottomed Crucible with Handle and Pouring Lip Platinum Crucible with Handle and Spout Platinum Pouring Crucible with Handle Pt Flat Bottom Crucible with Handle Handled Platinum Crucible with Lip

Material Properties

Atomic Properties
Element Value
Atomic number 78
Crystal structure Face centred cubic
Electronic structure Xe 4f¹⁴ 5d⁹ 6s¹
Valences shown 1,2,3,4
Atomic weight( amu ) 195.08
Thermal neutron absorption cross-section( Barns ) 9
Photo-electric work function( eV ) 5.3
Natural isotope distribution( Mass No./% ) 192/ 0.79
Natural isotope distribution( Mass No./% ) 196/ 25.30
Natural isotope distribution( Mass No./% ) 190/ 0.01
Natural isotope distribution( Mass No./% ) 195/ 33.80
Natural isotope distribution( Mass No./% ) 198/ 7.20
Natural isotope distribution( Mass No./% ) 194/ 32.90
Atomic radius - Goldschmidt( nm ) 0.138
Ionisation potential( No./eV ) 1/ 9.0
Ionisation potential( No./eV ) 2/ 18.6
Mechanical Properties
Element Value
Material condition Hard
Material condition Soft
Poisson's ratio 0.39
Poisson's ratio 0.39
Bulk modulus( GPa ) 276
Bulk modulus( GPa ) 276
Tensile modulus( GPa ) 170
Tensile modulus( GPa ) 170
Hardness - Vickers( kgf mm⁻² ) 40
Hardness - Vickers( kgf mm⁻² ) 100
Tensile strength( MPa ) 200-300
Tensile strength( MPa ) 125-150
Yield strength( MPa ) 14-35
Yield strength( MPa ) 185
Electrical Properties
Element Value
Electrical resistivity( µOhmcm ) 10.58@20°C
Temperature coefficient( K⁻¹ ) 0.00392@0-100°C
Physical Properties
Element Value
Boiling point( C ) 3827
Density( gcm⁻³ ) 21.45@20°C
Thermal Properties
Element Value
Melting point( C ) 1772
Latent heat of evaporation( J g⁻¹ ) 2405
Latent heat of fusion( J g⁻¹ ) 101
Specific heat( J K⁻¹ kg⁻¹ ) 133@025°C
Thermal conductivity( W m⁻¹ K⁻¹ ) 71.6@0-100°C
Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) 9@0-100
each

Choose Your Options

Close

Available Configurations

Properties common to all products in this list

Composition: Pt Form: Crucible Material: Platinum CAS Number: 7440-06-4 Commodity: Precious Metals Purity: 99.99% (4N) Outside Diameter: 40mm Inside Diameter: 30mm Height: 30mm

We are collecting your products, please wait!...

Shipping restrictions and charges may apply for some hazardous materials.