Supporting cutting edge research and development with advanced materials to your needs.
High performance materials for extreme conditions.
Innovative and lightweight materials with high mechanical properties and durability.
Materials used in chemical engineering from consumables to innovative solutions.
Advanced materials characterized by high electrical or insulation performance.
High quality materials for renewable energy.
Biocompatible and biodegradable materials to the highest standards.
High purity, biocompatible materials for high performance devices and applications.
High purity materials and crucibles suitable to your needs.
State of the art materials for the next generation of technologies.
High performance materials for extreme conditions.
Durable materials for corrosive environments.
Foils, disks or windows across a range of materials to facilitate innovation.
Polymers, metal foils, and sustainable materials for your packaging needs.
Our 170,000+ range of products can cater to all your research needs.
A variety of specialist materials to support space technology needs.
Highest quality materials including graphite and lithium compounds.
High purity materials to benefit your evaporation processes.
Thin, alkali-free, borosilicate glass for LCD displays to electronic packaging applications.
Ground-breaking graphene-based nanocomposites for regenerative medicine to R&D.
An industry-leading polyimide foil by DuPont™.
A high-performance para-aramid fiber revolutionizing materials science.
A machinable glass ceramic material offering higher performance, reliability, and durability.
This versatile polyester thin film by DuPont™.
It has excellent heat and flame-resistant properties from DuPont™.
A ceramic that addresses the traditional issues of brittleness, fragility, and hardness.
This range of high purity alumina (HPA) powders has exceptional purity levels, making it one of the purest forms of alumina commercially available.
This high temperature insulation material has exceptional properties and versatile applications.
This transparent, heat resistant polyolefin resin has unique properties for a range of applications.
Toggle Nav
Additive Free Polymer PMMA Spherical Powder
Our Additive Free Polymer PMMA Spherical Powder is a versatile material available in 39 variations. Characterized by high strength, hardness, and resistance to weathering and chemicals, this spherical powder is suitable for use in industrial coatings, adhesives, sealants and composites. With no additives, it provides consistent performance across applications where purity and particle morphology are critical. Our range of particle sizes and molecular weights allows you to select the variation that best suits your needs.
Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Maximum Particle Size: 600µm
Weight: 10000g
Product Shape: Spherical
Type: Injection Moulding Grade
Colour: Natural
CAS Number: 9011-14-7
UOM Code: 377-319-66
Formula: PMMA, Acrylic
Maximum Particle Size: 600µm
Weight: 10000g
Product Shape: Spherical
Type: Injection Moulding Grade
Colour: Natural
CAS Number: 9011-14-7
UOM Code: 377-319-66
SKU: 1000126540
Product Code: ME30-PD-000120
Tolerances
Powder
| Mean Particle Size | Nominal | |
|---|---|---|
| Minimum Particle Size | Nominal | |
| Maximum Particle Size | Nominal | |
| Maximum Particle Size | Nominal | |
| Particle Size D10 | Nominal | |
| Particle Size D50 | Nominal | |
| Particle Size D90 | Nominal |
Tolerances
Powder
| Mean Particle Size | Nominal | |
|---|---|---|
| Minimum Particle Size | Nominal | |
| Maximum Particle Size | Nominal | |
| Maximum Particle Size | Nominal | |
| Particle Size D10 | Nominal | |
| Particle Size D50 | Nominal | |
| Particle Size D90 | Nominal |
€891.92
each
- Buy 5 for €722.46 each and save 19%
- Buy 10 for €660.02 each and save 26%
No Minimum order
Approx. 2 weeks leadtime
Free technical support
*Free delivery worldwide
Material Properties for Polymers
Physical Properties
| Element | Value |
|---|---|
| Abbe number | 57.2 |
| Flammability | HB |
| Radiation resistance | Fair |
| Refractive index | 1.49 |
| Resistance to Ultra-violet | Good |
| Limiting oxygen index( % ) | 17-20 |
| Water absorption - over 24 hours( % ) | 0.2 |
| Density( gcm⁻³ ) | 1.19 |
Chemical Resistance
| Element | Value |
|---|---|
| Acids - concentrated | Good-Poor |
| Acids - dilute | Good-Poor |
| Alcohols | Good-Poor |
| Alkalis | Good |
| Aromatic hydrocarbons | Poor |
| Greases and Oils | Good |
| Halogenated Hydrocarbons | Poor |
| Halogens | Poor |
| Ketones | Poor |
Electrical Properties
| Element | Value |
|---|---|
| Dielectric constant @1MHz | 2.6 |
| Dissipation factor @ 1MHz | 0.014 |
| Dielectric strength( kV mm⁻¹ ) | 15 |
| Surface resistivity( Ohm/sq ) | 10¹⁴ |
| Volume resistivity( Ohmcm ) | 2-14 x 10¹⁵ |
Mechanical Properties
| Element | Value |
|---|---|
| Hardness - Rockwell | M92-100 |
| Poisson's ratio | 0.35-0.4 |
| Elongation at break( % ) | 2.5-4 |
| Tensile modulus( GPa ) | 2.4-3.3 |
| Izod impact strength( J m⁻¹ ) | 16-32 |
| Tensile strength( MPa ) | 80 |
Thermal Properties
| Element | Value |
|---|---|
| Heat-deflection temperature - 0.45MPa( C ) | 105 |
| Heat-deflection temperature - 1.8MPa( C ) | 95 |
| Lower working temperature( C ) | -40 |
| Upper working temperature( C ) | 50-90 |
| Specific heat( J K⁻¹ kg⁻¹ ) | 1400-1500 |
| Thermal conductivity( W m⁻¹ K⁻¹ ) | 0.17-0.19@23°C |
| Coefficient of thermal expansion( x10⁻⁶ K⁻¹ ) | 70-77 |
Other Customers Purchased
-
Additive Free Polymer PMMA Spherical Powder Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Mean Particle Size: 600µm
Weight: 10g
Molecular Weight: ~120k g/mol
Product Shape: Spherical
Type: Extrusion Grade
CAS Number: 9011-14-7
UOM Code: 745-494-45
€220.31eachDiscounts applied for volume purchases -
Additive Free Polymer PMMA Spherical Powder Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Maximum Particle Size: 600µm
Weight: 1000g
Product Shape: Spherical
Type: Injection Moulding Grade
Colour: Natural
CAS Number: 9011-14-7
UOM Code: 286-536-44
€298.79eachDiscounts applied for volume purchases -
Additive Free Polymer PMMA Spherical Powder Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Mean Particle Size: 600µm
Weight: 1000g
Molecular Weight: ~120k g/mol
Product Shape: Spherical
Type: Extrusion Grade
CAS Number: 9011-14-7
UOM Code: 659-058-70
€678.41eachDiscounts applied for volume purchases -
Additive Free Polymer PMMA Spherical Powder Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Mean Particle Size: 600µm
Weight: 100g
Molecular Weight: ~120k g/mol
Product Shape: Spherical
Type: Extrusion Grade
CAS Number: 9011-14-7
UOM Code: 306-571-02
€288.14eachDiscounts applied for volume purchases -
Additive Free Polymer PMMA Spherical Powder Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Mean Particle Size: 600µm
Weight: 500g
Molecular Weight: ~120k g/mol
Product Shape: Spherical
Type: Extrusion Grade
CAS Number: 9011-14-7
UOM Code: 173-272-46
€484.97eachDiscounts applied for volume purchases -
Additive Free Polymer PMMA Spherical Powder Grade: Additive Free Polymer
Formula: PMMA, Acrylic
Mean Particle Size: 600µm
Weight: 10000g
Molecular Weight: ~120k g/mol
Product Shape: Spherical
Type: Extrusion Grade
CAS Number: 9011-14-7
UOM Code: 751-973-27
€2,924.21eachDiscounts applied for volume purchases
