Skip navigation Accessibility information

Polimetilpentene ( TPX® ) - Tondino   -   Informazioni sul Materiale


Buy Polimetilpentene Tondino on-line

Standard products are available in these forms
Film Granulo Lamina Monofilamento Tondino
Film Granulo Lamina Monofilamento Tondino
Common Brand Names:
TPX®
 
General Description:  

General Description : A linear isotactic polyolefin more properly called poly 4-methyl pentene-1 which is made by Ziegler-Natta type catalysis (see also General Information under Polyethylene - Low Density). Commercially available grades are copolymers. It is semi-crystalline, transparent and usually colourless (one common grade is slightly yellow), very light and - for a polyolefin - expensive. [Its density of 0.83g.cm 3 is very close to the theoretical minimum for thermoplastics]. Its properties are reasonably similar to those of other polyolefins, compared to which it is more brittle and more gas permeable. It has a higher melting point (240C) than most polyolefins and retains form stability up to temperatures close to this i.e. it softens more slowly with increasing temperature than is normal for thermoplastics. It has good release characteristics and good high frequency electrical and valuable acoustic/ultrasonic properties.

Applications include medical and laboratory apparatus, microwave components and cookware and electronic components.

Grades of TPX®

TPX® is available in a range of grades with different melt flow rates (MFR) covering injection moulding, extrusion, blow moulding and coating. The list shown below gives details of the main processing methods and the MFR for each grade:

DX845 MFR of 9 g/10 min - highly recommended for film extrusion, possible use for injection moulding, fibre extrusion and blow moulding.

RT31 & RT31XB MFR of 21 g/10 min - highly recommended for injection moulding, possible use for film and fibre extrusion.

MX002 MFR of 21 g/10 min - highly recommended for injection moulding, film and mandrel extrusion, possible use for fibre extrusion and blow moulding.

MX002O MFR of 21 g/10 min - highly recommended for injection moulding and film extrusion, possible use for mandrel and fibre extrusion, and blow moulding.

MX004 & MX004XB MFR of 25 g/10 min - highly recommended for injection moulding, film and mandrel extrusion, possible use for fibre extrusion and blow moulding.

RT18 & RT18XB MFR of 26 g/10 min - highly recommended for injection moulding, possible use for film and fibre extrusion.

DX231 & DX310 MFR of 100 g/10 min - highly recommended for paper coating and possible use for fibre extrusion.

DX350 MFR of 110 g/10 min - highly recommended for paper coating and possible use for fibre extrusion.

DX820 MFR of 180 g/10 min - highly recommended for paper coating and fibre extrusion.

RT31 & RT31XB: low odor grades RT18XB, RT31XB & MX004XB: blue tint grades

   
 

   

Dati Tecnici per   Polimetilpentene


Polimetilpentene Tondino - Prodotti Standard   Click here to display prices
ME317900Polimetilpentene Tondino,    
Diametro:18 mm, Colore:Naturale, Grado:DX845
ME317903Polimetilpentene Tondino,    
Diametro:13 mm, Colore:Naturale, Grado:DX845
ME317904Polimetilpentene Tondino,    
Diametro:6,35 mm, Colore:Naturale, Grado:RT18
ME317905Polimetilpentene Tondino,    
Diametro:9,5 mm, Colore:Naturale, Grado:RT18
 
ME317906Polimetilpentene Tondino,    
Diametro:6,35 mm, Colore:Naturale, Grado:MX002
ME317907Polimetilpentene Tondino,    
Diametro:6,35 mm, Colore:Naturale, Grado:MX004
ME317908Polimetilpentene Tondino,    
Diametro:9,5 mm, Colore:Naturale, Grado:MX004
ME317909Polimetilpentene Tondino,    
Diametro:9,5 mm, Colore:Naturale, Grado:MX002
ME317910Polimetilpentene Tondino,    
Diametro:6,35 mm, Colore:Naturale, Grado:DX845
 
ME317911Polimetilpentene Tondino,    
Diametro:13 mm, Colore:Naturale, Grado:MX004
ME317912Polimetilpentene Tondino,    
Diametro:13 mm, Colore:Naturale, Grado:MX002
ME317913Polimetilpentene Tondino,    
Diametro:13 mm, Colore:Naturale, Grado:RT18
ME317914Polimetilpentene Tondino,    
Diametro:18 mm, Colore:Naturale, Grado:MX004
ME317915Polimetilpentene Tondino,    
Diametro:9,5 mm, Colore:Naturale, Grado:DX845
 
ME317916Polimetilpentene Tondino,    
Diametro:12,7 mm, Colore:Naturale, Grado:DX845
ME317917Polimetilpentene Tondino,    
Diametro:18 mm, Colore:Naturale, Grado:RT18
ME317918Polimetilpentene Tondino,    
Diametro:19 mm, Colore:Naturale, Grado:DX845
ME317919Polimetilpentene Tondino,    
Diametro:18 mm, Colore:Naturale, Grado:MX002
ME317920Polimetilpentene Tondino,    
Diametro:20 mm, Colore:Naturale, Grado:MX004
 
ME317923Polimetilpentene Tondino,    
Diametro:25 mm, Colore:Naturale, Grado:MX004
ME317924Polimetilpentene Tondino,    
Diametro:24 mm, Colore:Incolore, Grado:RT18, Condizione:Estruso
ME317925Polimetilpentene Tondino,    
Diametro:25 mm, Colore:Naturale, Grado:DX845
ME317926Polimetilpentene Tondino,    
Diametro:25 mm, Colore:Naturale, Grado:MX002
ME317927Polimetilpentene Tondino,    
Diametro:25 mm, Colore:Naturale, Grado:RT18
 
ME317930Polimetilpentene Tondino,    
Diametro:38 mm, Colore:Naturale, Grado:RT18
ME317932Polimetilpentene Tondino,    
Diametro:33 mm, Colore:Naturale, Grado:DX845
ME317933Polimetilpentene Tondino,    
Diametro:33 mm, Colore:Naturale, Grado:RT18
ME317934Polimetilpentene Tondino,    
Diametro:33 mm, Colore:Naturale, Grado:MX002
ME317935Polimetilpentene Tondino,    
Diametro:33 mm, Colore:Naturale, Grado:MX004
 
ME317936Polimetilpentene Tondino,    
Diametro:38 mm, Colore:Naturale, Grado:MX004
ME317937Polimetilpentene Tondino,    
Diametro:36,9 mm, Colore:Naturale, Grado:RT18
ME317938Polimetilpentene Tondino,    
Diametro:38 mm, Colore:Naturale, Grado:DX845
ME317939Polimetilpentene Tondino,    
Diametro:38 mm, Colore:Naturale, Grado:MX002
ME317950Polimetilpentene Tondino,    
Diametro:50 mm
 
ME317951Polimetilpentene Tondino,    
Diametro:50 mm, Colore:Naturale, Grado:MX002
ME317952Polimetilpentene Tondino,    
Diametro:50 mm, Colore:Naturale, Grado:MX004
ME317953Polimetilpentene Tondino,    
Diametro:50 mm, Colore:Naturale, Grado:RT18
Polimetilpentene Tondino - Prodotti Standard   Click here to display prices
Standard products are available in these forms
Film Granulo Lamina Monofilamento Tondino
Film Granulo Lamina Monofilamento Tondino

Index