Skip navigation Accessibility information

Poliammide - Nylon 6 ( PA 6 ) - Polvere   -   Informazioni sul Materiale


Buy Poliammide - Nylon 6 Polvere on-line

Standard products are available in these forms
Film Granulo Lamina Monofilamento Polvere Tondino Tubo
Film Granulo Lamina Monofilamento Polvere Tondino Tubo
Common Brand Names:
Akulon K and F, Capron, Maranyl B, Nylacast, Orgamid, Ultramid B
 
General Description:  

See also General Information under Nylon 6,6.

General Description : A semi-crystalline, white engineering thermoplastic very similar to nylon 6,6 with which it is in many respects interchangeable. Its melt viscosity is not quite as low as 6,6 so it is generally slightly easier to process and often preferred for moulding. Relative to 6,6 it has somewhat higher impact strength but somewhat lower strength and stiffness and higher water absorption (the highest of all nylons).

It can be monomer cast, commonly called just cast - ie.polymerised in a mould direct to a semi-fabricated shape. This allows the production of thick sections without voiding and gives a product with a slightly different balance of properties - a little stronger and stiffer, slightly reduced extensibility and impact strength.

Its applications are similar to those of nylon 6,6.

   
 

   

Dati Tecnici per   Poliammide---Nylon--6


Poliammide Nylon 6 Polvere - Prodotti Standard   Click here to display prices
AM306010Poliammide - Nylon 6 Polvere,    
Dimensione massima delle particelle:50 micron, Dimensione minima delle particelle:5 micron, Dimensione media delle particelle:15-20 micron
Poliammide Nylon 6 Polvere - Prodotti Standard   Click here to display prices
Standard products are available in these forms
Film Granulo Lamina Monofilamento Polvere Tondino Tubo
Film Granulo Lamina Monofilamento Polvere Tondino Tubo

Index