Skip navigation Accessibility information

Poliammide - Nylon 6 ( PA 6 ) - Film   -   Informazioni sul Materiale


Buy Poliammide - Nylon 6 Film on-line

Standard products are available in these forms
Film Granulo Lamina Monofilamento Polvere Tondino Tubo
Film Granulo Lamina Monofilamento Polvere Tondino Tubo
Common Brand Names:
Akulon K and F, Capron, Maranyl B, Nylacast, Orgamid, Ultramid B
 
General Description:  

See also General Information under Nylon 6,6.

General Description : A semi-crystalline, white engineering thermoplastic very similar to nylon 6,6 with which it is in many respects interchangeable. Its melt viscosity is not quite as low as 6,6 so it is generally slightly easier to process and often preferred for moulding. Relative to 6,6 it has somewhat higher impact strength but somewhat lower strength and stiffness and higher water absorption (the highest of all nylons).

It can be monomer cast, commonly called just cast - ie.polymerised in a mould direct to a semi-fabricated shape. This allows the production of thick sections without voiding and gives a product with a slightly different balance of properties - a little stronger and stiffer, slightly reduced extensibility and impact strength.

Its applications are similar to those of nylon 6,6.

   
 

   

Dati Tecnici per   Poliammide---Nylon--6


Poliammide Nylon 6 Film - Prodotti Standard   Click here to display prices
AM301015Poliammide - Nylon 6 Film,    
Spessore:0,015 mm, Colore:Incolore, Orientato:Orientato uniassialmente
AM301025Poliammide - Nylon 6 Film,    
Spessore:0,025 mm, Colore:Azzurro, Condizione:Stabilizzato a caldo
AM301026Poliammide - Nylon 6 Film,    
Spessore:0,025 mm, Colore:Incolore, Orientato:Orientato uniassialmente
AM301051Poliammide - Nylon 6 Film,    
Spessore:0,060 mm, Condizione:Trasparente, Condizione:Stabilizzato a caldo
 
AM301052Poliammide - Nylon 6 Film,    
Spessore:0,06 mm, Coil width:605 mm, Condizione:Trasparente, Condizione:Stabilizzato a caldo
AM301075Poliammide - Nylon 6 Film,    
Spessore:0,075 mm, Condizione:Semicristallino
AM301100Poliammide - Nylon 6 Film,    
Spessore:0,1 mm, Colore:Trasparente, Condizione:Semicristallino
AM301170Poliammide - Nylon 6 Film,    
Spessore:0,17 mm
AM301200Poliammide - Nylon 6 Film,    
Spessore:0,2 mm
 
AM301350Poliammide - Nylon 6 Film,    
Spessore:0,35 mm
AM301400Poliammide - Nylon 6 Film,    
Spessore:0,5 mm, Colore:Naturale
AM321017Poliammide - Nylon 6, 6 Film,    
Spessore:0,017 mm, Coil width:300 mm
AM321025Poliammide - Nylon 6, 6 Film,    
Spessore:0,025 mm
AM321300Poliammide - Nylon 6, 6 Film,    
Spessore:0,4 mm, Colore:Nero, Contiene:3-5% MoS2
 
AM321400Poliammide - Nylon 6, 6 Film,    
Spessore:0,5 mm
Poliammide Nylon 6 Film - Prodotti Standard   Click here to display prices

Properties for Poliammide - Nylon 6 Film

Property Value
Dielectric Constant @ 1MHz 2,7
Dielectric Strength @25µm thick kV mm-1 56
Dissipation Factor @1MHz 0,025
Elongation at Break % 250-550
Extension to break - Longitudinal % 375-500 - crystalline, 60-70 - monax.
Extension to break - Transverse % 375-500 - crystalline, 400-450 - monax.
Heat-sealing Temperature C 193-232
Permeability to Carbon Dioxide @25C x10-13 cm3. cm cm-2 s-1 Pa-1 0,06
Permeability to Nitrogen @25C x10-13 cm3. cm cm-2 s-1 Pa-1 0,007
Permeability to Oxygen @25C x10-13 cm3. cm cm-2 s-1 Pa-1 0,03
Permeability to Water @38C x10-13 cm3. cm cm-2 s-1 Pa-1 700
Shrinkage % <3 a 150C - cryst , 8-15/1-2 a 200C - monax.
Tensile strength - Longitudinal MPa 70-110 - crystalline, 290-320 - monax.
Tensile strength - Transverse MPa 70-110 - crystalline, 90-110 - monax.

Standard products are available in these forms
Film Granulo Lamina Monofilamento Polvere Tondino Tubo
Film Granulo Lamina Monofilamento Polvere Tondino Tubo

Index