Skip navigation Accessibility information

Carburo di Silicio - Legato alla reazione ( SiC ) - Lamina   -   Informazioni sul Materiale


Buy Carburo di Silicio - Legato alla reazione Lamina on-line

Standard products are available in these forms
Lamina Tondino Tubo
Lamina Tondino Tubo
Common Brand Names:
REFEL F®
 
General Description:  

To manufacture Reaction Bonded Silicon Carbide (RBSC), Silicon is infiltrated into a pre-formed silicon carbide/carbon powder green body which is then fired. This gives rise to around 10% free silicon, which fills the pores. The resulting microstructure has low porosity and a very fine grain. Shaping is normally carried out before firing, but the fired compact can be diamond ground to around 0.01mm tolerance. However, it is difficult to machine after firing. The material has high strength up to 1350C which results in its use as high temperature gas turbine components. The high hardness (harder than tungsten carbide) means that it is used extensively for bearings and seals. The high thermal conductivity combined with low thermal expansion leads to good thermal shock resistance. RBSC can tolerate a wider range of acids and alkalis than either tungsten carbide or alumina. Its oxidation resistance helps to give long service life in furnace applications. Unusually for ceramics, this material is electrically conducting.

   
 

   

Dati Tecnici per   Carburo-di-Silicio---Legato-alla-reazione


Carburo di Silicio Legato alla reazione Lamina - Prodotti Standard   Click here to display prices
SI643250Carburo di Silicio - Legato alla reazione Lamina,    
Spessore:5,0 mm, Condizione:Lavorato
SI643251Carburo di Silicio - Legato alla reazione Lamina,    
Spessore:5 mm
SI643300Carburo di Silicio - Legato alla reazione Lamina,    
Spessore:6,0 mm, Condizione:Lavorato
Carburo di Silicio Legato alla reazione Lamina - Prodotti Standard   Click here to display prices
Standard products are available in these forms
Lamina Tondino Tubo
Lamina Tondino Tubo

Index