Skip navigation Accessibility information

Polymethylpentene ( TPX® ) - Sheet   -   Material Information


Buy Polymethylpentene Sheet on-line

We stock and supply the following standard forms:
Film Granule Monofilament Rod Sheet
Film Granule Monofilament Rod Sheet
Common Brand Names:
TPX®
 
General Description:  

General Description : A linear isotactic polyolefin more properly called poly 4-methyl pentene-1 which is made by Ziegler-Natta type catalysis (see also General Information under Polyethylene - Low Density). Commercially available grades are copolymers. It is semi-crystalline, transparent and usually colorless (one common grade is slightly yellow), very light and - for a polyolefin - expensive. [Its density of 0.83g.cm 3 is very close to the theoretical minimum for thermoplastics]. Its properties are reasonably similar to those of other polyolefins, compared to which it is more brittle and more gas permeable. It has a higher melting point (240C) than most polyolefins and retains form stability up to temperatures close to this i.e. it softens more slowly with increasing temperature than is normal for thermoplastics. It has good release characteristics and good high frequency electrical and valuable acoustic/ultrasonic properties.

Applications include medical and laboratory apparatus, microwave components and cookware and electronic components.

Grades of TPX® TPX® is available in a range of grades with different melt flow rates (MFR) covering injection molding, extrusion, blow moulding and coating. The list shown below gives details of the main processing methods and the MFR for each grade:

DX845 - MFR of 9 g/10 min - highly recommended for film extrusion, possible use for injection molding, fiber extrusion and blow moulding.

RT31 & RT31XB - MFR of 21 g/10 min - highly recommended for injection molding, possible use for film and fiber extrusion.

MX002 - MFR of 21 g/10 min - highly recommended for injection molding, film and mandrel extrusion, possible use for fiber extrusion and blow moulding.

MX002O - MFR of 21 g/10 min - highly recommended for injection molding and film extrusion, possible use for mandrel and fiber extrusion, and blow moulding.

MX004 & MX004XB - MFR of 25 g/10 min - highly recommended for injection molding, film and mandrel extrusion, possible use for fiber extrusion and blow moulding.

RT18 & RT18XB - MFR of 26 g/10 min - highly recommended for injection moulding, possible use for film and fibre extrusion.

DX231 & DX310 - MFR of 100 g/10 min - highly recommended for paper coating and possible use for fibre extrusion.

DX350 - MFR of 110 g/10 min - highly recommended for paper coating and possible use for fibre extrusion.

DX820 - MFR of 180 g/10 min - highly recommended for paper coating and fibre extrusion.

RT31 & RT31XB: low odor grades RT18XB, RT31XB & MX004XB: blue tint grades

   
 

   

Technical Data for   Polymethylpentene


Polymethylpentene Sheet - Standard Products   Click here to display prices
ME313201Polymethylpentene Sheet,    
Thickness:2.0mm, Color:Natural, Grade:RT18, Condition:Compression molded
ME313300Polymethylpentene Sheet,    
Thickness:3.0mm, Color:Natural, Grade:RT18, Condition:Compression molded
ME313370Polymethylpentene Sheet,    
Thickness:4.8mm, Grade:RT18, Condition:Compression molded, Condition:Mottled surface
ME313380Polymethylpentene Sheet,    
Thickness:5.0mm, Color:Natural, Grade:RT18, Condition:Compression molded
 
ME313406Polymethylpentene Sheet,    
Thickness:6.0mm, Color:Natural, Grade:RT18, Condition:Compression molded
ME313410Polymethylpentene Sheet,    
Thickness:10mm, Color:Natural, Grade:DX845, Condition:Extruded
ME313411Polymethylpentene Sheet,    
Thickness:10mm, Color:Natural, Grade:MX004, Condition:Injection molded
ME313415Polymethylpentene Sheet,    
Thickness:12.7mm, Color:Natural, Grade:DX845, Condition:Extruded
ME313435Polymethylpentene Sheet,    
Thickness:22.5mm, Color:Natural, Grade:DX845, Condition:Extruded
 
ME313460Polymethylpentene Sheet,    
Thickness:28mm, Condition:Extruded, Condition:Machining feedstock
ME313470Polymethylpentene Sheet,    
Thickness:30mm, Condition:Extruded
Polymethylpentene Sheet - Standard Products   Click here to display prices
We stock and supply the following standard forms:
Film Granule Monofilament Rod Sheet
Film Granule Monofilament Rod Sheet

Index